Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

Loads for the 17 remington???

 
LinkBack Thread Tools Display Modes
  #1  
Old 05-31-2009, 10:56 PM
Junior Member
 
Join Date: Aug 2008
Posts: 19
Loads for the 17 remington???

Hi everyone,

Does anyone have any good loads for the 17 Remington???? Im currently using 25grn Hornady V-Max with 22.5grains of Benchmark 2 in remington brass and im only getting 1.75MOA(or there abouts)

Cheers

Michael
Reply With Quote
  #2  
Old 06-01-2009, 07:03 AM
Gold Member
 
Join Date: Dec 2001
Posts: 788
Re: Loads for the 17 remington???

I'm shooting 24.5gr/IMR-4320 still shooting some Rem 25gr bullets.
Reply With Quote
  #3  
Old 06-01-2009, 07:14 AM
Junior Member
 
Join Date: Jun 2007
Posts: 11
Re: Loads for the 17 remington???

I use a book max load of varget of 24.5g and 25 grain berger match HP's. My gun likes alot of jump to the lands.
Reply With Quote
  #4  
Old 06-01-2009, 11:39 AM
Platinum Member
 
Join Date: Jun 2001
Location: Potomac River
Posts: 5,060
Re: Loads for the 17 remington???

I have used IMR 4064 for a lot of years.
__________________
The Smokin Fur Rifle Club
Reply With Quote
  #5  
Old 06-01-2009, 01:15 PM
Junior Member
 
Join Date: Jun 2007
Posts: 11
Re: Loads for the 17 remington???

I had some trouble with the 25 grain vmaxes, even though i have a 1:9 twist.
Reply With Quote
  #6  
Old 06-01-2009, 06:19 PM
Junior Member
 
Join Date: Aug 2008
Posts: 19
Re: Loads for the 17 remington???

I tried 26 grains of Win 760 with hornady 25grain hps and got some better results with that(not that much better though only about 1.5 MOA). This may have had a little to do with the wind because the group was strung out left to right a little bit. Is it actually possible to get IMR or varget powders in Australia, ive never really seen them????
Reply With Quote
  #7  
Old 06-01-2009, 06:46 PM
436 436 is offline
Gold Member
 
Join Date: Mar 2009
Location: NorthWest
Posts: 584
Re: Loads for the 17 remington???

The “best load” I ever came up with was; Bullet… Remington's 25gr HP’…, when you could get them, you may find a few still around… if not… {Substitute Hornady 25gr HP} The powder charge I used was; 22.8grs {which is what Remington factory load weighed out at} the powder I used VV-135…. in a Remington case, with a Remington 7 1/2 BR...Primer. Cartridge OAL same as factory. This load shoots in all the .17 Remington’s I’ve owned; at about 4040 fps’…, the advertised Remington velocity. The factory ammo was and is very accurate ammo, this load may possible be Remington’s recipe. You won’t be disappointed if you can find all the components. I've shot many Yotes with this load; it was a “very, very accurate” load off the bench, and in the field.
436
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Loads for the 17 remington???
Thread Thread Starter Forum Replies Last Post
REMINGTON 260 Loads ernierod Reloading 3 02-25-2010 06:31 PM
.222 remington loads wadedc Reloading 1 06-02-2009 10:17 AM
Loads for 22-6mm Remington Jwood Reloading 7 04-25-2005 09:17 PM
.260 Remington Loads WyoHunter Reloading 0 04-02-2005 07:04 PM
260 remington loads wanted nowler Reloading 1 01-17-2005 06:15 PM


All times are GMT -5. The time now is 12:09 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC