Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Load Data Needed for 230 Berber in 300 RUM

LinkBack Thread Tools Display Modes
Old 03-20-2013, 05:06 PM
Silver Member
Join Date: Jul 2007
Posts: 460
Load Data Needed for 230 Berber in 300 RUM

I would appreciate it if anyone could share their accuracy load for the 230 grain Berger in the 300 RUM. I am currently shooting the Berger 210's with the Nosler brass, 215 Fed. primers, and 89 grains of Retumbo powder and getting around 1/2 MOA groups. Berger's reloading manual for the 230 gr. Berger calls for starting at 79.5 grains of Retumbo powder up to a maximum load of 89.2 grains.
I have been thinking about using the ladder method first to help determine my accuracy node and to see where I start seeing pressure signs at. One question I have is should I start out around 80 grains and work up in 1/2 grain increments or just go with 1 grain increments? As expensive and as hard as it is to get reloading components I would like to avoid a lot of unnessecary experimenting.
Your advice and imput is very much appreciated.
Reply With Quote


Thread Tools
Display Modes

Current Poll
Are you on Facebook?
Yes - 46.51%
1,093 Vote
No - 19.32%
454 Votes
No, but I may join - 1.74%
41 Votes
No way, are you kidding? - 36.21%
851 Votes
Total Votes: 2,350
You may not vote on this poll.

All times are GMT -5. The time now is 12:09 AM.

Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC