close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Let's see your reloading bench

LinkBack Thread Tools Display Modes
  #1  
Unread 06-24-2008, 02:44 PM
Silver Member
 
Join Date: Nov 2007
Location: Vegas
Posts: 310
Let's see your reloading bench

I'm getting closer to getting everything i need to reload, and it's time to start building my bench. So post up some pictures of your reloading bench/set ups to help me with some ideas. And if you have any, include any tricks or tips that you did on your set-up that you think are helpful. I can get lumber pretty easily (read - cheap ) so i was planning on using a couple glulam beams for the actual bench top, but I haven't made it much past that. Thanks in advance,

Kevin
__________________
Reply With Quote
  •   #2  
    Unread 06-25-2008, 08:55 AM
    Gold Member
     
    Join Date: Aug 2007
    Location: Bull Mtns MT
    Posts: 593
    Here is a couple of my set-up.

    __________________
    I'd Rather Make a Slow Hit Than a Fast Miss!

    Reply With Quote

      #3  
    Unread 06-25-2008, 09:26 AM
    Platinum Member
     
    Join Date: Jan 2007
    Location: MS
    Posts: 1,652
    Keep them coming guys....I want to see too. I am in the process of trying to get new cabinets and benches built for my reloading room.
    __________________
    I admit that I know just enough to be dangerous.....but dangerous at ever extending distances.
    Reply With Quote
      #4  
    Unread 06-25-2008, 09:52 AM
    Silver Member
     
    Join Date: Jan 2008
    Location: Pelham, AL
    Posts: 182


    I know, way to clean for a reloading bench. But, it is in the guest room, so it needs to stay picked up.

    Rocky
    Reply With Quote
      #5  
    Unread 06-25-2008, 03:11 PM
    Silver Member
     
    Join Date: Aug 2007
    Location: Oklahoma
    Posts: 170







    It is getting to where it needs an overhaul! built it out of 2X12's and it is stout! 5' wide, 3 1/2' deep, and 3' foot tall. Also have storage underneath tables surface with a couple drawers and such.
    __________________
    Member - 7STW Club
    Reply With Quote
      #6  
    Unread 06-25-2008, 05:36 PM
    Platinum Member
     
    Join Date: Feb 2008
    Location: Wampum, PA
    Posts: 1,530
    It's all I'm allowed room for. Tight but functional.




    __________________
    "I may be dumb, but I'm not stupid." - Terry Bradshaw

    Last edited by jmason; 06-25-2008 at 06:11 PM. Reason: better picture
    Reply With Quote
      #7  
    Unread 06-25-2008, 06:46 PM
    Silver Member
     
    Join Date: Nov 2004
    Location: Michigan
    Posts: 218
    I started out like Jmason until a few years back. I found this site and a few thousand dollars later...Sinclair Intl' loved me for awhile. The bench (not pic) continues around the wall and contains all my powder measures and trimming equipment. I kinda went all out and went with red oak and a few coats of poly.
    __________________
    QDMA Member
    7STW Club

    Last edited by wadevb1; 06-25-2008 at 07:40 PM.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Let's see your reloading bench
    Thread Thread Starter Forum Replies Last Post
    My reloading bench 264junkie Reloading 3 01-15-2011 09:04 PM
    reloading bench Gary22-250 Reloading 6 12-01-2010 02:33 PM
    reloading bench TH Reloading 8 04-27-2010 10:05 AM
    What is the Best Reloading Bench redbone Reloading 4 09-17-2007 09:43 AM
    Reloading Bench Lostsheep Equipment Discussions 6 04-14-2002 08:11 PM


    All times are GMT -5. The time now is 06:32 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC