close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Lad data for 300wsm RL17 and 150 gm E-Tips

LinkBack Thread Tools Display Modes
  #1  
Unread 03-19-2013, 09:06 PM
Junior Member
 
Join Date: Oct 2012
Location: Minocqua, wi
Posts: 9
Lad data for 300wsm RL17 and 150 gm E-Tips

Wondering if anyone has any load data for 300wsm using RL 17 and nosler 150 gr E-Tips? Thxs
Reply With Quote
  •   #2  
    Unread 03-19-2013, 09:28 PM
    Platinum Member
     
    Join Date: Jan 2008
    Location: SOCIALIST CONTROLLED TERRITORY OF NEW YORK
    Posts: 4,400
    Re: Lad data for 300wsm RL17 and 150 gm E-Tips

    Quote:
    Originally Posted by Rusty Nail View Post
    Wondering if anyone has any load data for 300wsm using RL 17 and nosler 150 gr E-Tips? Thxs
    You may get a bite but that's a very small bullet for the majority of use here. I worked up to 63g R17 with a 208g AMAX. Just for point of reference be safe.
    __________________
    "People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
    If you want to shoot Bergers start here!
    http://www.longrangehunting.com/arti...accuracy-1.php
    Reply With Quote

      #3  
    Unread 03-20-2013, 05:50 AM
    Platinum Member
     
    Join Date: May 2008
    Location: South of Canada and North of Wyoming
    Posts: 6,068
    Re: Lad data for 300wsm RL17 and 150 gm E-Tips

    I agree... that's a small bullet for LR purposes. I have loaded 180 E-Tips with a max load of 67.5 gr for a velocity of 3200 fps. You should be safe with a starting load a few grains lower than this.
    __________________
    - Mark

    You will never know how much it has cost my generation to preserve your freedom. I hope you make good use of it.
    ~ John Quincy Adams
    Reply With Quote
      #4  
    Unread 03-20-2013, 06:26 AM
    Junior Member
     
    Join Date: Oct 2012
    Location: Minocqua, wi
    Posts: 9
    Re: Lad data for 300wsm RL17 and 150 gm E-Tips

    Thxs guys. I understand its a small bullet but was going to just use for deer. Just want to start off with safe powder charge.
    Reply With Quote
      #5  
    Unread 03-20-2013, 08:14 AM
    Platinum Member
     
    Join Date: Dec 2001
    Posts: 1,058
    Re: Lad data for 300wsm RL17 and 150 gm E-Tips

    Quote:
    Originally Posted by Rusty Nail View Post
    Wondering if anyone has any load data for 300wsm using RL 17 and nosler 150 gr E-Tips? Thxs
    I use 150gr E-Tip in a 30-06 it's one of my cow elk rifle and I've played around with the 168gr E-Tip in a 300WSM along with the 165grTSX,168grTSX and 165gr AB.

    In the box of E-Tip I got the rec .050" to .100" of the lands for optimal accuracy and not to exceed mid load. Alliant site has loading data for the 300WSM using 150gr with R-17. Nolser manual #7 they have load for the 300WSM with 150gr E-Tip and they give special seating depth with E-Tip and none of the loads use R-17.

    Alliant site does have loading data or the 300WSM using R-17 and 150gr bullet but it's not the E-Tip. I think you should call Alliant and get a start load from them be a good place to start.
    __________________
    VFW
    Reply With Quote
      #6  
    Unread 03-20-2013, 08:31 AM
    Platinum Member
     
    Join Date: May 2008
    Location: South of Canada and North of Wyoming
    Posts: 6,068
    Re: Lad data for 300wsm RL17 and 150 gm E-Tips

    RL17 and H4350 have very similar burn rates with RL17 being slightly slower. I always use the H4350 start load for a particular bullet for the RL17 starting load for that bullet. Calling Nosler wouldn't hurt, but they might not have data.

    Also, different bullets of same cal and weight sometimes have different reactions to the same powder. I would try looking for H4350 data if you cant find RL17 data for the 150 E-Tip. Nosler's online date is showing load info for RL15 and RL19. RL17 should fall between.

    300 Winchester Short Magnum - 150 Grain Load Data
    __________________
    - Mark

    You will never know how much it has cost my generation to preserve your freedom. I hope you make good use of it.
    ~ John Quincy Adams
    Reply With Quote
      #7  
    Unread 03-20-2013, 12:09 PM
    Junior Member
     
    Join Date: Oct 2012
    Location: Minocqua, wi
    Posts: 9
    Re: Lad data for 300wsm RL17 and 150 gm E-Tips

    Spoke with Nosler today. They have not tested with the RL 17 and have no data for that powder. I known alliant has info for the RL 17, but has a speer bullet only, which is a shorter bullet than the copper ones, in which the load density would be much different and thus higher pressures. I do have a call into Allaint as well. I will update if I find out anything. Thxs all.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 08:25 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC