Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

jammin into the lands with 4350

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-24-2014, 09:24 PM
Gold Member
 
Join Date: Mar 2014
Location: ohio
Posts: 906
jammin into the lands with 4350

if I take 200gr smk in 3006 and jam them (then back them off a little will I be in danger of pressures my question is only with imr4350
Reply With Quote
  #2  
Old 03-24-2014, 09:31 PM
Platinum Member
 
Join Date: Jul 2011
Location: Near Napoleon,MI
Posts: 1,021
Re: jammin into the lands with 4350

As long as you do a normal load development and stop at the appropriate point, no. That is my usual starting point with a VLD and then I will generally increase the jump from there if the results are not the best. Its the load length (provided it fits in the magazine) that would allow the greatest powder volume.
__________________
Reply With Quote
  #3  
Old 03-25-2014, 01:32 PM
Platinum Member
 
Join Date: Jan 2008
Posts: 1,111
Re: jammin into the lands with 4350

For accuracy Sierras don't like to be jammed. They like to jump a ways.
Reply With Quote
  #4  
Old 03-25-2014, 01:39 PM
Gold Member
 
Join Date: Mar 2014
Location: ohio
Posts: 906
Re: jammin into the lands with 4350

Quote:
Originally Posted by RT2506 View Post
For accuracy Sierras don't like to be jammed. They like to jump a ways.
that's good I loaded them before they were jammed they didn't shoot worth a darn about 4in at 100 so hopefully they will be better jumping them I have 100 or so I would like to get them to shoot
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 05:22 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC