close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

jackmann

LinkBack Thread Tools Display Modes
  #1  
Unread 04-28-2013, 07:51 PM
Junior Member
 
Join Date: May 2012
Posts: 3
jackmann

anyone concerned about trimming 300 wm brass shorter than 2.600, ive got some norma accidently cut 2.595 and would use in a tight chambered hart
barrel-maybe throat errosion or similar damage,all loads are under max charges by close to half range any thoughts? looking for your ideas
thanks
Reply With Quote
  •   #2  
    Unread 04-28-2013, 08:37 PM
    Edd Edd is offline
    Platinum Member
     
    Join Date: Jan 2011
    Location: Tulsa
    Posts: 2,086
    Re: jackmann

    It wouldn't concern me.
    Reply With Quote

      #3  
    Unread 04-28-2013, 09:06 PM
    Platinum Member
     
    Join Date: Dec 2011
    Location: Michigan
    Posts: 1,121
    Re: jackmann

    Me neither.
    Reply With Quote
      #4  
    Unread 04-29-2013, 07:50 AM
    Platinum Member
     
    Join Date: May 2012
    Posts: 4,108
    Re: jackmann

    I reform '06 brass to 270 at times and they are a hell of a lot shorter after squaring up than your few thou. and it's never made a difference there. The brass will grow back out in a shot or two anyway.
    Reply With Quote
      #5  
    Unread 04-29-2013, 06:14 PM
    Junior Member
     
    Join Date: May 2012
    Posts: 3
    Re: jackmann

    thanks for your your replies ,ill load em up and give some paper a workout
    thanks again
    jackmann
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 03:32 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC