close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Inside case neck beveled

LinkBack Thread Tools Display Modes
  #1  
Unread 01-14-2008, 04:38 PM
Gold Member
 
Join Date: Mar 2006
Location: polson MT.
Posts: 741
Inside case neck beveled

Do you bevel the inside case neck each time you shoot or just one time?
Reply With Quote
  •   #2  
    Unread 01-14-2008, 10:17 PM
    Silver Member
     
    Join Date: May 2007
    Location: Alabama
    Posts: 157
    The only time you need to chamfer the neck is after case trimming.
    Reply With Quote

      #3  
    Unread 01-15-2008, 09:47 AM
    Silver Member
     
    Join Date: Jan 2005
    Posts: 260
    I'll try and clear that up a bit. You need one anytime there isn't one. So you need to bevel (chamfer) new brass and anytime you trim thereafter. The bevel always stays with the case unless you make it go away by trimming.
    Reply With Quote
      #4  
    Unread 01-15-2008, 12:32 PM
    Gold Member
     
    Join Date: Mar 2006
    Location: polson MT.
    Posts: 741
    thanks alot.
    Reply With Quote
      #5  
    Unread 01-16-2008, 11:54 AM
    Silver Member
     
    Join Date: Oct 2004
    Location: Atlanta, GA
    Posts: 309
    new shooter

    to fine tune a bit, if you are shooting flat base bullets, chamfer is mandatory. Period. If you are shooting vld's, chamfer with a vld tool. If shooting BTHP's, chamfer is nice if there but amust as stated, after trimming and first time. Overbore
    __________________
    Member, Revolutionary War Veterans Association
    Reply With Quote
    Reply

    Bookmarks

    « 7mm STW | New Brass »
    Thread Tools
    Display Modes


    Similar Threads for: Inside case neck beveled
    Thread Thread Starter Forum Replies Last Post
    Lyman case media residue inside the case. joe0121 Reloading 2 05-31-2011 07:17 PM
    Neck turning mandrel/scarring inside case mouth nddodd Reloading 7 03-07-2011 09:10 AM
    case trim pilot correct size but inside case dimensions too small. partisan1911 Reloading 14 05-24-2010 01:36 AM
    Inside Neck Cleaning Buffalobob Videos Of Tech Stuff And Reviews 2 04-03-2009 11:07 AM
    Inside the case neck LRHWAL Reloading 5 02-10-2009 08:35 AM


    All times are GMT -5. The time now is 11:12 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC