How ofter do u uniform primer pockets.

[sp6x6]

I like the press type, have both

[SidecarFlip]

I pull mine with a Cabelas hammer style puller, I think RCBS has one too. About 15 bucks. The come with a collet assortment for different calibers.

Looks like a hammer with a plastic hollow head (that contains the bullet and powder).......

I'm still leaning toward firing pin stickout.....??

[timmyatnop]

Gona pull the bullets and reload a couple of these same cases and see what happens ,ill keep u informed.

[timmyatnop]

I took 5 minutes to look at my nofire rounds today, i dont own a tool to measure the exact deph of the primers but i can say that there appears to be no difference, in dept between these and the ones that fired.

[Broz]

Originally Posted by timmyatnop

I took 5 minutes to look at my nofire rounds today, i dont own a tool to measure the exact deph of the primers but i can say that there appears to be no difference, in dept between these and the ones that fired.

But could you have had some that were not seated all the way to the bottom of the pocket?

Jeff

[Trickymissfit]

Originally Posted by timmyatnop

I uniform my primer pockets ,after every shot but i just had a couple of 338 edge rounds not fire. Primers had been struck by firing pin but did not fire. Cci 250 were the primers , what do u think my cultript is the primers or the brass.

I do it one time. I do have a funny looking wire brush that fits in a B&D electric screw driver that I use to clean the residue out of the pocket after firing, and even then I only do it after two or three firings
gary

[Trickymissfit]

Originally Posted by trueblue

I do it once, along with deburring the flash holes.
Use Sinclair primer pocket uniformer, which will only cut to a certain depth. Never have had a problem.

I use the K&M, and love them
gary