Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


How much to turn necks?

LinkBack Thread Tools Display Modes
Unread 06-29-2006, 07:54 PM
Platinum Member
Join Date: Feb 2004
Location: Pennsyltucky
Posts: 2,630
Re: How much to turn necks?

.014 is .006 clearance on a loaded round where .015 is .004. run a case in your full length die without the expander to open the neck back up and tell us what the outside measures.if it doesn't squeeze the bullet too much, this is the way to go to get straight ammo.i have a FL die on order from forster right now to do just that.my die will be around .003 less than a loaded round.this is what "master B" recommends!
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: How much to turn necks?
Thread Thread Starter Forum Replies Last Post
turn necks before fire forming an ackley improved 1sniper Reloading 8 07-10-2011 01:11 AM
Turn necks on virgin brass? Tikka Lover Reloading 4 05-10-2009 11:30 AM
To turn or not (necks) Alan Griffith Reloading 40 04-25-2009 09:25 PM
When to turn heikki02003 Reloading 19 02-15-2009 12:39 AM
Do I turn necks are aneal the brass. Iron Worker Reloading 5 09-25-2006 08:06 AM

All times are GMT -5. The time now is 08:10 PM.

All content ©2010-2015 Long Range Hunting, LLC