close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Help Please .......

LinkBack Thread Tools Display Modes
  #15  
Unread 05-05-2009, 12:46 PM
Silver Member
 
Join Date: Jul 2008
Location: pa
Posts: 177
Re: Help Please .......

Hey Guys ,
I called Redding this morning. The Man told me the problem is .. Some of the bullets being made like the v-max , and being a lower grain and shorter bullet that the number 23 seater in the Redding type A dies will not seat some to the "listed" oal. The bullet enters the seater and surrounds the ogive on bullet and seats. On these types of bullets the bullet enters the seater and goes in to far before it "grabs"because of them being slim you run out of stroke and adjustment .
He said he would Gladly send me a new seater thats different then the number 23. This seater is supposibly either not as deep or more slim.
dave
__________________
PROUD SUPPORTER OF HUNTING,FISHING, AND OUTDOORS .2ND AMMENDMENT
Reply With Quote
  •   #16  
    Unread 05-10-2009, 01:23 AM
    Junior Member
     
    Join Date: May 2009
    Posts: 1
    Re: Help Please .......

    take your seating die undo it all the way.put a case in the pres pul the handle all the way down . turn your die down untill it touches the case. back the die one turn set the big nut.then work with the fine ajustment if this dont work give me a call 865-399-9876 my name is steve west
    Reply With Quote

      #17  
    Unread 05-11-2009, 02:01 PM
    Silver Member
     
    Join Date: Jul 2008
    Location: pa
    Posts: 177
    Re: Help Please .......

    Hey Guys ,
    I called Redding this morning. The Man told me the problem is .. Some of the bullets being made like the v-max , and being a lower grain and shorter bullet that the number 23 seater in the Redding type A dies will not seat some to the "listed" oal. The bullet enters the seater and surrounds the ogive on bullet and seats. On these types of bullets the bullet enters the seater and goes in to far before it "grabs"because of them being slim you run out of stroke and adjustment .
    He said he would Gladly send me a new seater thats different then the number 23. This seater is supposibly either not as deep or more slim.
    dave


    P.S. THANKS FOR EVERYONES SUGGESTIONS!!!!
    __________________
    PROUD SUPPORTER OF HUNTING,FISHING, AND OUTDOORS .2ND AMMENDMENT
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 08:04 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC