Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Help: Load problem

LinkBack Thread Tools Display Modes
Unread 11-20-2009, 05:35 PM
Junior Member
Join Date: Jan 2006
Posts: 18
Help: Load problem

I am having a problem getting a load to work in my fireformed brass. My fireforming load is 43gr RL22 and a berger 105 seated to fit my magazine. It shoots .25 MOA out to 800 yards. I kneck sized the brass with a redding knecksizing die, kept my seating depth the same and I am getting 8 to 10 inch groups at 500 yards. My velocity spread is over 200fps average. Goes from 3200 to 3400 fps. The fireform loads had a spread of 6fps. Every thing shoots right on at 100 yards. My ladder test looked like a benchrest group.
Any suggestions would be appreciated.
Too close is knife work, ie barrel thumps em on the head [img]/ubbthreads/images/graemlins/smile.gif[/img]

Last edited by BCDeerWild; 11-23-2009 at 05:30 PM.
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Help: Load problem
Thread Thread Starter Forum Replies Last Post
.260 load pressure problem Gota6.5 Reloading 7 02-09-2011 06:09 PM
Hornady Lock-n-Load OAL guage problem Elkslayer1 Reloading 2 07-29-2010 01:06 AM
Problem finding a load. HELP!! JARHEAD1371 Rifles, Bullets, Barrels & Ballistics 5 07-28-2010 01:32 AM
wierd velocities, Load or chrono problem? 300remum Reloading 2 05-16-2010 11:51 PM
Load or scope problem ? Aussie Rifles, Bullets, Barrels & Ballistics 5 02-22-2007 08:37 PM

All times are GMT -5. The time now is 03:43 PM.

All content ©2010-2015 Long Range Hunting, LLC