Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

Help finding post. Nosler brass

 
LinkBack Thread Tools Display Modes
  #1  
Old 02-21-2009, 06:29 AM
Silver Member
 
Join Date: Dec 2008
Location: Canberra, Australia
Posts: 111
Help finding post. Nosler brass

I saw a post and I only think it was here. It had a picture of a Nolser case beside a Remington case cut in half so you could see the differance in wall thickness.

Tryed searching but I could not find it.
Reply With Quote
  #2  
Old 02-21-2009, 07:53 PM
Silver Member
 
Join Date: Dec 2008
Location: Canberra, Australia
Posts: 111
Re: Help finding post. Nosler brass

Bump, Bump
Reply With Quote
  #3  
Old 02-21-2009, 08:08 PM
Platinum Member
 
Join Date: Jan 2004
Location: Blackfoot, Idaho
Posts: 8,050
Re: Help finding post. Nosler brass

If I remember correctly Goodgrouper made the post.

I recall the comparison but when I made my own comparison several months later, the Noslers looked more like the Remmy.
Reply With Quote
  #4  
Old 02-21-2009, 08:21 PM
Silver Member
 
Join Date: Dec 2008
Location: Canberra, Australia
Posts: 111
Re: Help finding post. Nosler brass

Found it
300 RUM Nosler/Rem Brass Pic
After 3hrs of searching
Reply With Quote
  #5  
Old 02-21-2009, 08:36 PM
Platinum Member
 
Join Date: Jan 2004
Location: Blackfoot, Idaho
Posts: 8,050
Re: Help finding post. Nosler brass

I's say you have what it takes to be successful in life and especially hunting.

Good goin'

So much for my memory.........

Even though the Noslers seem heavier in the head are, primers loosen well before any other pressure signs appear.

I shot about 15 of my 50 and put all of them in my brass bucket (trash). I had to shoot a 270 AM as if it were a 270 Win due to brass limits. I was sad.

Last edited by royinidaho; 02-21-2009 at 08:40 PM.
Reply With Quote
  #6  
Old 02-22-2009, 06:25 AM
Silver Member
 
Join Date: Dec 2008
Location: Canberra, Australia
Posts: 111
Re: Help finding post. Nosler brass

I'm thinking the squarer edge on the primer pocket will be better suited to the Harts case saver.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Help finding post. Nosler brass
Thread Thread Starter Forum Replies Last Post
Need help in finding brass for .221 Fireball Goofycat Rifles, Bullets, Barrels and Ballistics 14 10-22-2011 06:10 PM
Nosler 280 AI Brass Available! jeffwhip Reloading 13 11-12-2010 09:24 PM
Nosler 300 RUM brass *SPF* montana_native Reloading Equipment and Components 1 10-04-2009 05:55 PM
Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM
nosler 300 rum brass available B Jordan Rifles, Bullets, Barrels and Ballistics 23 10-03-2006 10:12 PM

Current Poll
Where in the US do you live?
West of the Mississippi River - 60.81%
897 Votes
East of the Mississippi River - 36.88%
544 Votes
On the Mississippi River on a houseboat - 2.31%
34 Votes
Total Votes: 1,475
You may not vote on this poll.

All times are GMT -5. The time now is 11:59 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC