Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

H1000 Loads For a .338 Lapua

 
LinkBack Thread Tools Display Modes
  #1  
Old 12-23-2004, 11:45 AM
Silver Member
 
Join Date: Feb 2004
Location: Northern California
Posts: 138
H1000 Loads For a .338 Lapua

Ok First let me give you the gun specs...I hope somebody here is shooting a similar Rifle ..it's a G.A. Precision 27" Mike Rock Barrel on a Rem 700 Action, I'm shooting 300 Grain SMK"s, I started out with 87 Grains of Reloader 25 and worked up to 90 it is ok but I have no doubt it can shoot better... I have shot the best groups out of it with Black Hills 300gr Smk's but they were Hot! every piece of brass has an ejecter mark on it..the bolt was not hard to lift just the marks on the brass ...it has also been pretty cool everytime I have shot the .338..in the high 50's to mid 60's
just bought a lb of H1000 and was wondering if anybody here has had good luck with it? any load info would be great ...Like I stated above I"m using 300 Smk's,and Lapua Brass, and 215M Fed Primers. Thanks
__________________
Long Range Demon TacKac Out!
Reply With Quote
  #2  
Old 12-23-2004, 11:54 AM
Bronze Member
 
Join Date: Oct 2003
Posts: 42
Re: H1000 Loads For a .338 Lapua

These are in a GAP CZ550 with an AI barrel. George chambered it to load 300 SMK at 3.7" OAL.
H1000
89.5 2700
90 2724
90.5 2752
91 2764
91.5 2770

These all shot very well. Above 92 gr the bolt lift was getting stiff.
Reply With Quote
  #3  
Old 10-09-2012, 07:24 PM
Junior Member
 
Join Date: Nov 2011
Posts: 14
Re: H1000 Loads For a .338 Lapua

just wondering, I thought I saw something on here about the 250 primers, now I wonder if thats the one to use or 215s work

I have the same marks on mine brass after the reloader 19, havent tried the h-1000 yet. loaded and ready though
Reply With Quote
  #4  
Old 10-09-2012, 10:02 PM
Junior Member
 
Join Date: Aug 2012
Posts: 8
Re: H1000 Loads For a .338 Lapua

I shoot H-1000 throught my 338-378 WBY with great results. Best powder I could find for 250gn Partitions (hunting) Havent been able to get ahold of any 300gn SMK's yet though. As for most loads so far the chrono has shown that my gun in particular likes the H-1000. very close FPS reading with almost all loads. like within 30fps...
Reply With Quote
  #5  
Old 10-09-2012, 11:13 PM
Gold Member
 
Join Date: Jan 2009
Location: GSP, SC, USA
Posts: 629
Re: H1000 Loads For a .338 Lapua

Just noticed the post is 8 years old and OP ain't posted since 2006 but the good news is that the info is still just a good as the day it was posted.
Good luck.
__________________
Son, The first shot is the important one - the others just make him run faster! Grandpa 1949
NRA Life Member 1970
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: H1000 Loads For a .338 Lapua
Thread Thread Starter Forum Replies Last Post
.338 Lapua Data H1000 and RL19 twvannatta Reloading 2 10-09-2012 07:19 PM
.338 Lapua loads Murray.Kline Reloading 18 12-24-2011 10:02 PM
338 Edge H1000 loads and 225 Accubonds daveosok Reloading 1 11-22-2007 08:49 PM
338 lapua loads? jdg33 Reloading 8 06-06-2007 07:52 PM
338 RUM loads w/ H1000 JD338 Reloading 15 09-04-2006 06:32 PM


All times are GMT -5. The time now is 11:31 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC