Long Range Hunting Online Magazine



Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Goto loads for 7mm REM Mag and 160 Accubonds

LinkBack Thread Tools Display Modes
  #22  
Unread 07-29-2009, 07:41 PM
Junior Member
 
Join Date: Jul 2009
Posts: 1
Re: Goto loads for 7mm REM Mag and 160 Accubonds

Quote:
Originally Posted by blkdog View Post
My best load with that bullet is 60 grains of IMR 4831SC, Rem 91/2 primers loaded .010 off the lands in a#1. If I do my part it will shoot in .75 in. all day. Velocity is 3065fps at 2200 foot el.
Another powder you might want to try is Retumbo. I have had exellent results with 72 gr with Berger 168VLDs and Rem 91/2 primers, vel 3105 at 220 feet el. Hope this helps.
How about imr4350 160gr accubond in a rem 700?
Reply With Quote

  #23  
Unread 11-09-2009, 05:40 PM
Bronze Member
 
Join Date: Nov 2003
Location: Sask,Canada
Posts: 62
Re: Goto loads for 7mm REM Mag and 160 Accubonds

Warning: This load is ABOVE Max. loads listed in reloading manuals. Please reduce by 4 grs and work up.




Ruger #1 7mm Rem Mag. 26 inch barrel.

160 gr. Accubond

Win. Brass New.

3.510 OAL(long throat on chamber). Nice thing about single-shot rifles.

CCI 250 Mag Primer.

Hodgdon Retumbo 72.5 gr

avg Velocity 3025 fps (+4 deg Celcius)

Rifle would shoot 1 inch group or better @ 100 yards.

No pressure signs.

Shot 3 Mule Deer and load was devastating. Almost too much at under 300 yards. One doe take at 324 yards was just about perfect. Not much damage.
Reply With Quote
  #24  
Unread 11-09-2009, 08:38 PM
DKA DKA is offline
Bronze Member
 
Join Date: Sep 2009
Location: Lumberton, NC
Posts: 91
Re: Goto loads for 7mm REM Mag and 160 Accubonds

My go to load for 7MM Rem Mag is, 72.5 Gr H 1000, under the 160 Gr Accubond. Very accurate load at about 3000 fps.
__________________
Turn Adversity Into Advantage
Reply With Quote
  #25  
Unread 11-14-2009, 09:44 PM
Junior Member
 
Join Date: Dec 2008
Posts: 1
Re: Goto loads for 7mm REM Mag and 160 Accubonds

Quote:
Originally Posted by dwm View Post
One of my buddies just bought some 160 Accubonds and is looking for load data for the 7mm REM Mag and either IMR4350 or H4350.

I ran him some numbers in Quickload, but he was interested to see what everyones go to load is ...

How about it?
CCI 250
H4831 sc 63.5 gr
160gr Accubond Nosler OAL 3.364
real good load
Reply With Quote
  #26  
Unread 11-28-2009, 12:49 PM
Gold Member
 
Join Date: Oct 2006
Posts: 651
Re: Goto loads for 7mm REM Mag and 160 Accubonds

3.34"
162 gr HNDY SST moly 26" barrel Ruger #1 62.8 gr H4350 2950 fps
162 gr HNDY SST moly 26" barrel VZ24M98 62.8 gr H4350 0.75" group at 100 yards
162 gr HNDY SST moly 24" barrel 1908M98 65.5 gr H4350 3000 fps 4" group at 429 yards
162 gr HNDY SST moly 26" barrel VZ24M98 65.5 gr H4350 3050 fps 6" group at 429 yards
162 gr HNDY SST moly 26" barrel VZ24M98 67.5 gr H4350 threshold of short brass life
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes


Similar Threads for: Goto loads for 7mm REM Mag and 160 Accubonds
Thread Thread Starter Forum Replies Last Post
Wtb 165 grn accubonds. parkj5 Reloading Equipment and Components 1 07-03-2010 08:10 PM
338 cal Accubonds 358sta Reloading Equipment and Components 0 07-30-2009 03:22 PM
338 Edge H1000 loads and 225 Accubonds daveosok Reloading 1 11-22-2007 08:49 PM
7mm accubonds firstcoueswas80 Guns For Sale 6 03-06-2006 11:22 AM
Loads for 7mm Ultra and 160 Accubonds Idaho_Elk_Huntr Reloading 11 01-09-2006 11:52 AM


All times are GMT -5. The time now is 12:27 AM.


All content ©2010-2015 Long Range Hunting, LLC