Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

Forming 300 AAC Blackout Brass

 
LinkBack Thread Tools Display Modes
  #1  
Old 12-31-2010, 10:17 AM
Silver Member
 
Join Date: Feb 2010
Location: Bloomingdale, Mi
Posts: 337
Forming 300 AAC Blackout Brass

Which case is easier to start with the .223 Rem or .221 Fireball?
__________________

Reply With Quote
  #2  
Old 12-31-2010, 11:48 AM
Junior Member
 
Join Date: Dec 2010
Posts: 12
Re: Forming 300 AAC Blackout Brass

The 221 fireball should work fine, just run it through the expander manderal and trim.
Reply With Quote
  #3  
Old 01-08-2011, 05:08 PM
Junior Member
 
Join Date: Jan 2011
Posts: 1
Re: Forming 300 AAC Blackout Brass

I'm not one to fuss with making brass, I've just got my order from here, and it loaded right up.

It was nice to get shinny brass and it had a bevel on the inside and outside of the case.

I would buy from again

https://sites.google.com/site/300bla...home/buy-brass

I bought the 300 Blackout brass, it was all LC 09
Reply With Quote
  #4  
Old 01-08-2011, 05:15 PM
Platinum Member
 
Join Date: Jan 2008
Location: SOCIALIST CONTROLLED TERRITORY OF NEW YORK
Posts: 4,391
Re: Forming 300 AAC Blackout Brass

Would you guys mind giving some details on your uppers? Did you have the chambers cut to 300 wisper or 300 AAC specs. I am in the process of doing something with this round as well.
__________________
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
If you want to shoot Bergers start here!
http://www.longrangehunting.com/arti...accuracy-1.php
Reply With Quote
  #5  
Old 01-08-2011, 06:04 PM
Silver Member
 
Join Date: Feb 2010
Location: Bloomingdale, Mi
Posts: 337
Re: Forming 300 AAC Blackout Brass

I'm building a 8.5" or 10 " pistol so eventually i can build a SBR and get a suppressor. I've probably going to use a noveske barrel and a spikes tactical stripped upper.
__________________

Reply With Quote
  #6  
Old 01-08-2011, 11:00 PM
Platinum Member
 
Join Date: Jan 2008
Location: SOCIALIST CONTROLLED TERRITORY OF NEW YORK
Posts: 4,391
Re: Forming 300 AAC Blackout Brass

Quote:
Originally Posted by Sharpshooter243 View Post
I'm building a 8.5" or 10 " pistol so eventually i can build a SBR and get a suppressor. I've probably going to use a noveske barrel and a spikes tactical stripped upper.
Sounds nice I would like to see a pic when your done
__________________
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
If you want to shoot Bergers start here!
http://www.longrangehunting.com/arti...accuracy-1.php
Reply With Quote
  #7  
Old 08-06-2011, 01:03 PM
Junior Member
 
Join Date: Apr 2010
Posts: 11
Re: Forming 300 AAC Blackout Brass

Redding 3-Die Set 300 AAC Blackout (7.62x35mm) - MidwayUSA

Redding dies are out.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Forming 300 AAC Blackout Brass
Thread Thread Starter Forum Replies Last Post
forming 350 Rem mag brass Skimbleshanks Reloading 6 02-26-2011 11:00 PM
forming 6.5-06 brass trueblue Reloading 9 02-11-2010 07:30 AM
25-06 brass forming help pjracer Reloading 1 10-17-2008 02:45 PM
forming brass shooterpunk2 Reloading 4 06-13-2008 03:03 PM
Forming 7mm-08 Brass sewwhat89 The Basics, Starting Out 3 12-03-2005 09:56 PM


All times are GMT -5. The time now is 06:05 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC