Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Forming 25-06 from Lapua 30-06

LinkBack Thread Tools Display Modes
Unread 02-17-2007, 05:11 PM
Gold Member
Join Date: Jan 2006
Location: Nebraska
Posts: 507
Re: Forming 25-06 from Lapua 30-06

In the past what I have done to neck down 30-06 to 25-06 was:
First run them through a 270win FL die then I belive the 25-06 FL die.
Its been several years since I have done it so I may have used a 264 win mag die (just to neck size) between the 270 and 25-06 dies.
With the brass I was using (can't remember which brass)I didn't need to turn necks just trim a lot.
Factory chamber.
Reply With Quote

Unread 02-17-2007, 09:31 PM
Bronze Member
Join Date: May 2006
Posts: 37
Re: Forming 25-06 from Lapua 30-06

.25-06 brass is really the way to go - make them consistent and shoot. But then where would the fun of arguing be?

p.s if necking down, skip the 270 intermediate step stuff - been doing 30 to 25 for 23 years and have been just fine.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Forming 25-06 from Lapua 30-06
Thread Thread Starter Forum Replies Last Post
Fire-forming 280 Ackley Improved from Lapua 30-06? jeffwhip Reloading 26 08-06-2012 12:04 AM
forming 350 Rem mag brass Skimbleshanks Reloading 6 02-26-2011 11:00 PM
25-06 brass forming help pjracer Reloading 1 10-17-2008 02:45 PM
forming brass shooterpunk2 Reloading 4 06-13-2008 03:03 PM
fire forming skeeter Rifles, Bullets, Barrels & Ballistics 3 10-07-2004 09:38 AM

All times are GMT -5. The time now is 09:12 AM.

All content ©2010-2015 Long Range Hunting, LLC