Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


fire form brass question

LinkBack Thread Tools Display Modes
Unread 07-05-2012, 04:55 PM
Silver Member
Join Date: Sep 2009
Location: north platte ne
Posts: 387
Re: fire form brass question

Awsime that sounds great, i cant wait to get it and start shooting. Thanks for all the advice.
Reply With Quote

Unread 03-31-2014, 05:16 PM
Silver Member
Join Date: Aug 2012
Location: Champaign, IL
Posts: 203
Re: fire form brass question

Originally Posted by timmyatnop View Post
Has anyone here, ever fire formed 243 brass to 6mm cm cailber. If so have u ever got a donut around the inside of the neck, and if so what is the best way to remove it?
.243 is a 6mm caliber. They both use the same bullet diameter. If your reforming 243 Winchester to an improved version, then you've already seen what you need to know.

Reply With Quote
Unread 03-31-2014, 09:26 PM
Platinum Member
Join Date: Aug 2003
Location: NC, oceanfront
Posts: 4,082
Re: fire form brass question

I can't pull up drawings right now, but if he's pushing the shoulder back with a die, he'll have a donut because brass in the shoulder becomes a thicker part of the new necks.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: fire form brass question
Thread Thread Starter Forum Replies Last Post
6.5-06 fire form load Fred Ea Reloading 5 03-01-2012 05:38 PM
6.5-06 AI fire form loads??? Fathead Reloading 5 07-07-2011 09:41 PM
form 1 process question eddybo General Discussion 4 04-23-2008 01:25 PM
338 Lupa Imp. fire form load info & specs on new big 338 wildcat Reloading 9 10-14-2006 07:13 PM
Stock shape/form question royinidaho The Basics, Starting Out 1 10-04-2005 09:56 PM

All times are GMT -5. The time now is 10:00 PM.

Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC