Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Determining a safe load?

LinkBack Thread Tools Display Modes
Unread 08-06-2008, 04:56 PM
Silver Member
Join Date: Dec 2006
Posts: 423
Determining a safe load?

Ok, I have recently bought a sako 75 finnlight 300 WSM. I was surprised to see that it is a long action. I bought a full length magazine so I can run 200 grain accubonds seated close to the lands.

The max load for IMR 7828 in the book is 68 grains with an overall length of 2.860". With my bullets 0.020 off the lands my overall length is 3.100.

That leaves me 0.24 of extra case capacity. How can I safely determine a maximum load before heading to the range.

Last edited by Bigcat_hunter; 08-06-2008 at 05:08 PM.
Reply With Quote

Unread 08-06-2008, 07:14 PM
Silver Member
Join Date: Dec 2006
Posts: 423
I got some use full info on Noslers forum regarding this.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Determining a safe load?
Thread Thread Starter Forum Replies Last Post
Determining true BC Forester The Basics, Starting Out 9 05-25-2008 12:07 PM
determining the right load filatiev 2 Reloading 1 04-09-2008 09:41 PM
Determining Neck Diameter Jim1 AB Reloading 8 03-25-2008 10:30 PM
Need help determining scope value.. Randy in Va Long Range Scopes and Other Optics 0 11-06-2004 12:34 AM
Determining Group Sizes...? MAELTY The Basics, Starting Out 3 04-16-2003 09:39 AM

All times are GMT -5. The time now is 12:24 AM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC