Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Competition Seater Die Question

LinkBack Thread Tools Display Modes
Unread 03-11-2008, 07:04 PM
Silver Member
Join Date: May 2007
Location: California
Posts: 458
From the Vickerman web site:

The internal guide is chamber reamed to fit the neck and shoulder of a specific caliber case and the bullet slot in the open window is reamed to .001" over the bullet diameter. The window is 1 1/2" long t
Reply With Quote

Unread 03-22-2008, 01:08 PM
Junior Member
Join Date: Mar 2008
Posts: 3
The HornadyŽ Custom-Grade Rifle seater die, also has a sliding sleeve that contacts the bullet, and slides up, forcing the bullet to be centered into the die body & case.

I haven't had a chance to use one yet, but I've ordered a couple of sets to try out.

I do use the Forster Competition seaters with the Mico adustment, and they work very, very well.

Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Competition Seater Die Question
Thread Thread Starter Forum Replies Last Post
WTB//RCBS .308 competition seater die Anvil11-87 Reloading Equipment and Components 0 05-17-2011 09:03 PM
WTB 300 rum Competition Seater--found thanks! peppy1hunting Reloading Equipment and Components 2 03-09-2011 11:33 PM
Redding Competition Seater ? statjunk Reloading 9 08-05-2010 05:31 PM
6mm Rem brass, competition seater and 2 die set Idaho_Elk_Huntr Reloading Equipment and Components 1 06-07-2010 09:29 PM
FS: Redding 30-06 Competition Seater nad1967 Reloading Equipment and Components 1 09-26-2009 01:27 PM

All times are GMT -5. The time now is 02:32 AM.

All content ©2010-2015 Long Range Hunting, LLC