Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Case forming question.

LinkBack Thread Tools Display Modes
Unread 05-15-2009, 12:05 AM
Junior Member
Join Date: Mar 2009
Posts: 10
Case forming question.

Can a 9.3x64 case be formed down to the 7x57 case size sucessfully. Will the standard bolt head except the bigger case head with out it being turned down. I do have genuine reason for asking this as I want to create a thick neck case to look at a few accuracy issues. I have been handloading for 35+ years so understand the safety side of load developement, release clearance, tapered neck idiosyncrasies, etc etc etc. I would like to know if the case head will re-form and the rim issue before I buy the expensive brass.

Von Gruff.
Reply With Quote
  • Reply


    Thread Tools
    Display Modes

    Similar Threads for: Case forming question.
    Thread Thread Starter Forum Replies Last Post
    30 Gibbs case forming woods Reloading 14 03-22-2016 06:32 PM
    Case forming issues Crane Reloading 1 10-29-2009 12:31 AM
    7mmAM Case Forming TMR Reloading 8 11-06-2006 09:09 PM
    30-338 case forming question DougH9 Reloading 4 12-31-2005 05:43 PM
    Forming 6mm-06 case Problems? mindcrime The Basics, Starting Out 8 11-27-2005 10:40 AM

    All times are GMT -5. The time now is 07:04 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC