Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

browning abolt 300wsm

 
LinkBack Thread Tools Display Modes
  #1  
Old 05-16-2013, 06:16 AM
Gold Member
 
Join Date: Feb 2012
Posts: 832
browning abolt 300wsm

Been working up loads for a abolt i bough this winter. Its got me shaking my head. I started with 5 differnt 180 grain bullets and it shot 2-3 inch groups with the loads i had. In all of these tests i used both re17 and 4350. I figured oh well it doesnt llike 180s. then i started shooting 165s and groups went to 5 inches plus!! I figured oh well this things a dud and ill just bring it back. Just for grins i brought along four 150 grain loads Two with 150 horn sst and two with 150 barnes tsx using both re17 and 4350 again. All four of these loads went under an inch for 5 shots. Ive seen guns that prefered differnt weight bullets but never to this much of an extream. Anyone else loading for an abolt in 300 wsm and whats your gun prefer?
Reply With Quote
  #2  
Old 05-16-2013, 06:56 AM
Silver Member
 
Join Date: Apr 2009
Location: New Mexico
Posts: 230
Re: browning abolt 300wsm

Try slower powders with the heavier bullets, I use RL22 and H1000 in my browning a-bolt with all my gullet weights.
Reply With Quote
  #3  
Old 05-16-2013, 07:05 PM
Bronze Member
 
Join Date: May 2012
Location: Arborg, Manitoba
Posts: 53
Re: browning abolt 300wsm

I'm using CCI magnum primers with 58.5 grns of H4350 pushing a Hornaday match 208 grn and getting decent (.875 @ 200 yds) results from it. One problem... it's in a Tikka stainless heavy barrel.
May not be a Browning, but it's a load that works for me. Might be worth a try.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 08:56 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC