Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Best Brass

LinkBack Thread Tools Display Modes
Unread 02-22-2007, 02:37 AM
Gold Member
Join Date: Dec 2004
Location: Black Hills,South Dakota
Posts: 669
Re: Best Brass

Referring to a minimum spec chamber (not neccessarily minimum spec in a repeater,but tighter than a production chamber) to keep the brass from stretching more than neccessary.Done by having the reamer made to obtain the desired clearances from new brass dimensions.Norma is very good brass if hot loads arent equated with accuracy.
Remington brass usually gets a bad rap,but Ive had very good luck with it in a tighter than production chamber.I can usually get 7-8 reloads in my 300 saum before the necks get too hard and cause inconsistent neck tensions,Ive never had a case failure in this gun with the Rem brass (split necks etc.) before the neck tension gets crappy.
The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms -Samuel Adams
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Best Brass
Thread Thread Starter Forum Replies Last Post
338 Lapua Brass compared to 300 Remington Ultra Brass DANTEC Rifles, Bullets, Barrels & Ballistics 6 02-29-2012 11:43 PM
Group differences in Weatherby Brass versus new Norma Brass TX mountain hunter Long Range Hunting & Shooting 5 12-29-2010 10:17 PM
25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
338 Edge, Brass life test. Rem 300RUM brass AJ Peacock Reloading 15 12-30-2009 12:26 PM
Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM

All times are GMT -5. The time now is 09:17 AM.

All content ©2010-2015 Long Range Hunting, LLC