close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Bench Source Annealing Machine Special Offer Price

LinkBack Thread Tools Display Modes
  #1  
Unread 03-19-2012, 12:59 PM
SPONSOR
 
Join Date: Mar 2004
Location: Danville, PA
Posts: 1,102
Bench Source Annealing Machine Special Offer Price

If any of you have looked at annealing machines you've seen some good models and some so so's. I recently got to play a little with the Bench Source Annealing Machine by Vertex Mfg. and this is by far the best set up I've seen yet. No wheels or plates to change. You can anneal anything from the smallest case to 408 Chey-Tac brass on the same wheel.

Bench Source Annealing Machine Special Offer Price-annealer16b.jpg


I sent an e-mail to David Dorris at Vertex Mfg. who makes the Bench Source Annealing Machine. I inquired about a multiples discount to get a good deal and sell several at one time. He replied back that if I can get at least 3-4 committed orders I can get them for a better price. I'll have them all shipped to me and then I'll take care of dispersing them to their new owners. Graf and Sons sell them for $529.99 plus shipping. I can get them for $475 each plus the shipping. I'd like to place an order by the end of the month so PM or e-mail me if your interested. I'll have to have payment upfront in the form of USPS Money Order only.

David's E-mail Quote

"The machine has a two year warranty on the electronics including motors, and lifetime warranty on materials and workmanship. This warranty excludes normal wear and tear of course.

The standard drive plate or shell plate that comes with the machine will work on all rifle cases. The only other plate we make is for the .50 BMG. Price for the .50 plate if needed is $44.95 when ordered from us with a machine purchase. The two plates will cover every cartridge you would ever own.

As you may have seen or read, our machine spins the case while it is being heated. This feature along with the Infinitely Variable Timing Control, gives the very best results in uniformity and there’s no other machine out there easier to setup or change over for different calibers. Average production rate is 550-600 pcs per hour for a standard .308 sized case head."

Thanks

Kevin
__________________
Home of the "EXTENDED IMPACT" DVD

www.mcrifles.com
Reply With Quote
  •   #2  
    Unread 03-19-2012, 04:03 PM
    Gold Member
     
    Join Date: Mar 2006
    Location: polson MT.
    Posts: 741
    re: Bench Source Annealing Machine Special Offer Price

    Got one love it.
    Reply With Quote

      #3  
    Unread 03-19-2012, 04:04 PM
    Bronze Member
     
    Join Date: Sep 2011
    Location: Dallas, TX
    Posts: 43
    re: Bench Source Annealing Machine Special Offer Price

    Quote:
    Originally Posted by Kevin Cram View Post
    If any of you have looked at annealing machines you've seen some good models and some so so's. I recently got to play a little with the Bench Source Annealing Machine by Vertex Mfg. and this is by far the best set up I've seen yet. No wheels or plates to change. You can anneal anything from the smallest case to 408 Chey-Tac brass on the same wheel.

    Attachment 7656


    I sent an e-mail to David Dorris at Vertex Mfg. who makes the Bench Source Annealing Machine. I inquired about a multiples discount to get a good deal and sell several at one time. He replied back that if I can get at least 3-4 committed orders I can get them for a better price. I'll have them all shipped to me and then I'll take care of dispersing them to their new owners. Graf and Sons sell them for $529.99 plus shipping. I can get them for $475 each plus the shipping. I'd like to place an order by the end of the month so PM or e-mail me if your interested. I'll have to have payment upfront in the form of USPS Money Order only.

    David's E-mail Quote

    "The machine has a two year warranty on the electronics including motors, and lifetime warranty on materials and workmanship. This warranty excludes normal wear and tear of course.

    The standard drive plate or shell plate that comes with the machine will work on all rifle cases. The only other plate we make is for the .50 BMG. Price for the .50 plate if needed is $44.95 when ordered from us with a machine purchase. The two plates will cover every cartridge you would ever own.

    As you may have seen or read, our machine spins the case while it is being heated. This feature along with the Infinitely Variable Timing Control, gives the very best results in uniformity and there’s no other machine out there easier to setup or change over for different calibers. Average production rate is 550-600 pcs per hour for a standard .308 sized case head."

    Thanks

    Kevin

    I have one of these and I love it! Hell, if nothing else it makes my reloading bench look cooler!
    Reply With Quote
      #4  
    Unread 03-19-2012, 04:07 PM
    Silver Member
     
    Join Date: Aug 2008
    Location: Arvada, Colorado
    Posts: 472
    re: Bench Source Annealing Machine Special Offer Price

    PM sent
    Reply With Quote
      #5  
    Unread 03-21-2012, 07:30 AM
    SPONSOR
     
    Join Date: Mar 2004
    Location: Danville, PA
    Posts: 1,102
    Re: Bench Source Annealing Machine Special Offer Price

    I got a few interested. Would like to have as many as possible for an order placed by end of this month to get the best deal.

    Bump to top !!!!
    __________________
    Home of the "EXTENDED IMPACT" DVD

    www.mcrifles.com
    Reply With Quote
      #6  
    Unread 03-21-2012, 08:34 AM
    Platinum Member
     
    Join Date: Feb 2007
    Location: Townsend, Montana.
    Posts: 8,474
    Re: Bench Source Annealing Machine Special Offer Price

    Guys if you are on the fence here I can tell you after owning a KL and now a Bench Source, the Bench Source is the schnitz! It makes annealing a breeze and I do it almost every firing now.

    Great Machine!!

    Jeff
    __________________
    Reply With Quote
      #7  
    Unread 03-27-2012, 09:14 AM
    SPONSOR
     
    Join Date: Mar 2004
    Location: Danville, PA
    Posts: 1,102
    Re: Bench Source Annealing Machine Special Offer Price

    Planning on placing an order next Mon. 4-2-12 for all of those that are getting one. Any more interest in owning one of these, now's the time. PM or e-mail me for any questions.

    Thanks
    __________________
    Home of the "EXTENDED IMPACT" DVD

    www.mcrifles.com
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Bench Source Annealing Machine Special Offer Price
    Thread Thread Starter Forum Replies Last Post
    Ordered my Annealing machine R.Ph. 380 Reloading 2 10-02-2011 10:04 AM
    annealing machine with a difference zoeper Videos Of Tech Stuff And Reviews 6 02-27-2011 08:02 PM
    How to anneal cases using the Ballistic Edge annealing machine. Len Backus Reloading 2 05-14-2010 12:48 AM
    WTB- Annealing Machine Forester Reloading Equipment and Components 4 03-15-2010 11:36 AM
    Frankford Arsenal Super Annealing Machine 338 LEGEND Reloading 2 05-27-2009 10:20 PM


    All times are GMT -5. The time now is 08:41 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC