Re: BARREL BREAK IN /WORKING UP LOAD FOR Win.308
Rifle is exceeding all expectations.
Took the rest of the "break-in" loads out just to double check if the last visit was a fluke. The bbl appeared to be cleaned down to bare metal.
I put a 210 Berger down range, then a cease fire was called. Then 5 minutes later, I put another 5 rounds down range and again a .300 center to center. I've never accidently found a load so easy, even though it wasn't what I had in mind for this rifle.
I took 3 test loads with the 150 Btips and didn't even need to shoot any loaded with the IMR4064. The Varget loads printed less than .3 for 5 shots (47.5 gr, 150 Btip, Lapua, 210M seated at 2.81).
None of the test loads grouped over 1/2".