close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Barnes LRX Accuracy issues...

LinkBack Thread Tools Display Modes
  #8  
Unread 01-12-2013, 03:22 PM
Platinum Member
 
Join Date: Mar 2012
Location: ND
Posts: 2,801
Re: Barnes LRX Accuracy issues...

Quote:
Originally Posted by crazyhorse View Post
Using Fed LR GMM now

I have some CCI that I will give a try
If the primer change doesnt work then i would try adjusting seating depth a little more. You are dialing it in!!
__________________

I'm 18
"Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth."
~George Washington

"The only advantage a light rifle has is weight, all other advantages go to the heavy rifle."
~ JE Custom

Biggest fail of 2014 so far... http://www.longrangehunting.com/foru...ea-ftf-128972/

My guess on W3P .308 230 Grain Bullet: G1 .740-.755
Reply With Quote
  •   #9  
    Unread 01-12-2013, 07:58 PM
    Silver Member
     
    Join Date: Oct 2004
    Location: southeast
    Posts: 128
    Re: Barnes LRX Accuracy issues...

    Not sure a primer will cause exact matching inconsistencies in two groups, but at this point I will try anything!

    I'm still not showing any signs of pressure so I went up 1/2 grain and went for the middle of my two most accurate seating depths.

    See what happens!
    Reply With Quote

      #10  
    Unread 01-12-2013, 08:01 PM
    Platinum Member
     
    Join Date: Nov 2008
    Location: SW Montana
    Posts: 5,637
    Re: Barnes LRX Accuracy issues...

    Quote:
    Originally Posted by crazyhorse View Post
    Not sure a primer will cause exact matching inconsistencies in two groups, but at this point I will try anything!

    I'm still not showing any signs of pressure so I went up 1/2 grain and went for the middle of my two most accurate seating depths.

    See what happens!
    Primers will do that for sure!!! There can be many other things but I run a primer test if I see that kind of grouping.
    __________________
    "Pain is weakness leaving your body"
    Reply With Quote
      #11  
    Unread 01-13-2013, 10:16 AM
    Silver Member
     
    Join Date: Jun 2010
    Posts: 203
    Re: Barnes LRX Accuracy issues...

    Quote:
    Originally Posted by Broz View Post
    Back when I shot Barnes they wanted to be off the lands at least .050". I have not tried the LRX's though, the barnes days are gone for me.

    Jeff
    So Broz, what are you using these days?
    Reply With Quote
      #12  
    Unread 08-09-2016, 07:44 AM
    BRN BRN is offline
    Junior Member
     
    Join Date: Mar 2007
    Posts: 11
    Re: Barnes LRX Accuracy issues...

    Crazyhorse, how did you make out in the end with the LRX. I am having the same issues.
    Reply With Quote
      #13  
    Unread 08-09-2016, 09:36 AM
    Platinum Member
     
    Join Date: Aug 2013
    Location: Grants Pass, Oregon
    Posts: 1,354
    Re: Barnes LRX Accuracy issues...

    Quote:
    Originally Posted by crazyhorse View Post
    Went to the range today to try out several new loads in my .260.

    First I tried the 140gr Amax with 45gr of H4831sc - bug holes! .336 five shot group!!!

    Next was the 127gr LRX with 43gr of H4350. Terrible! It was so bad I didn't even measure, but if I had to guess it would be around 3"! They are seated just off the lands and showing no signs of pressure. I was really hoping to get a sub MOA load out of this bullet to use for deer hunting.

    I know it is the first try with this bullet but I have never had one start this far off. Any suggestions?

    Barrel is a pacnor 1:8 @ 24"
    So far my best groups with one rifle came in at .090" off the lands and the other came in at .180" from the lands. The .090" is in a Pac-Nor barrel and the other is a Christensen Arms.
    __________________
    Wildcats 'til the factories catch up.
    Reply With Quote
      #14  
    Unread 08-09-2016, 06:08 PM
    BRN BRN is offline
    Junior Member
     
    Join Date: Mar 2007
    Posts: 11
    Re: Barnes LRX Accuracy issues...

    Thanks. What primers at you using?
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 03:23 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC