Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


ATTN: 7mm Rem. Mag. reloaders

LinkBack Thread Tools Display Modes
Unread 09-20-2010, 07:06 AM
Silver Member
Join Date: Nov 2009
Posts: 137
Re: ATTN: 7mm Rem. Mag. reloaders

Ok, its like this. I know how to measure brass to determine bushing size. Problem is, I haven't purchased any brass or factory ammo yet. I've never chambered a round in the rifle.

I wanted to place an order to get all the stuff I needed at one time.

Bushings. (A couple of sizes)
Precision Mics.
Case holder for my Wilson Trimmer.

I didnt to order all of the above except for the bushings. I hate to wait for one order to arrive, only to place another after measuring the brass. Been down that road before. Thats why I was hoping you guys could shed some light.

Where I live, you can't just run to the sporting goods store and expect to pick up whatever size bushings you would like.
Reply With Quote

Unread 09-20-2010, 02:02 PM
Platinum Member
Join Date: Oct 2007
Location: Mountians of SW NC, near Asheville
Posts: 1,595
Re: ATTN: 7mm Rem. Mag. reloaders

"...what is the most common sized bushing used?"

You are asking more than we can possibly deliver. Not only is that information not available to us, it wouldn't mean a thing to you if we did. All that will matter to YOU is how thick the necks in the cases you get will be. And we don't know that either.

I use Lee Collet Neck sizers for factory chambers and unturned brass and don't bother with bushings of any size.

Last edited by boomtube; 09-20-2010 at 02:07 PM.
Reply With Quote
Unread 09-20-2010, 03:18 PM
Silver Member
Join Date: Nov 2009
Posts: 137
Re: ATTN: 7mm Rem. Mag. reloaders


I've already stated twice that I will be purchasing several different sizes. Simply for that reason.

Thanks to Broz and coyotezapper. You guys gave me the answer I was looking for.
Reply With Quote
Unread 09-20-2010, 03:37 PM
DKA DKA is offline
Bronze Member
Join Date: Sep 2009
Location: Lumberton, NC
Posts: 91
Re: ATTN: 7mm Rem. Mag. reloaders

Originally Posted by tackdriver10 View Post
Thanks guys! That will get me started on the right foot...

Are any of you using H-1000? I have quite a bit on hand so I figured I would start there with either a 168gr. Berger or maybe a 160gr. Accubond.
I use H 1000 & 160 Gr Accubond. Very accurate load, in my 7MM Rem Mag.
Turn Adversity Into Advantage
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: ATTN: 7mm Rem. Mag. reloaders
Thread Thread Starter Forum Replies Last Post
Dillon Reloaders all Sosld flyfishn Reloading Equipment and Components 0 07-08-2011 06:18 PM
Looking for big gun reloaders? huntforlife Reloading 0 05-14-2011 07:55 AM
reloaders and ideas longrangehuntr Reloading 0 07-16-2010 07:47 AM
Reloaders... ya gotta see this!!!! Eaglet General Discussion 8 12-22-2009 03:53 AM
Reloaders nest rotorhead Reloading 3 11-16-2006 07:55 AM

All times are GMT -5. The time now is 05:27 AM.

Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC