Originally Posted by Forester
If that was an offer to sell some then thank you very much, I think I have decided to go with the 7-300WSM at this point though. Better brass, cheaper to shoot, virtually identical performance, and a little easier on barrels maybe.
And I have never done a wildcat so no time like the present.
You can fire form the 300WSM after necking in a 7 WSM chamber and have a standard
chamber and use the more expensive brass if you just want to use Norma brass.
That way you can have a rifle that you can buy standard ammo or Make your own.
The 7/300 WSM has less case capacity than a 7 WSM so you have to load harder to get
the same velocity .
Also there is no measurable difference in barrel wear .
I use the Winchester brass and it does fine as long as you don't load it hard . but the
Norma brass is not much tougher or I would use it.
With things being what they are shortages are a pain but there is brass that is available
just not like 2 or 3 years ago. Things will get better because people are just about stocked
up with re loading components, I see a lot more ammo and re loading supplies now than
6 months ago.
So it all boils down to weather you want a 7/300 or a 7 WSM.
Just though I would let you know that you had an option.
J E CUSTOM