Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


7RM Loads For 140 Accubond?

LinkBack Thread Tools Display Modes
Unread 01-22-2007, 05:42 PM
Bronze Member
Join Date: Dec 2005
Posts: 61
7RM Loads For 140 Accubond?

Load data for 7MM Rem Mag and 140 Accubond would be appreciated.
"Those who beat their swords into plowshares will end up plowing for those who did not." -Benjamin Franklin
Reply With Quote

Unread 01-22-2007, 07:20 PM
Platinum Member
Join Date: Jun 2003
Location: Hermiston, Oregon
Posts: 2,014
Re: 7RM Loads For 140 Accubond?

I shoot the 140g Btip w/68.5g RL-22. The AB should give similar results. I get 3250fps out of my rem 700 7 RM w/24" factory tube.
Reply With Quote
Unread 01-23-2007, 07:15 AM
Silver Member
Join Date: Jan 2005
Posts: 186
Re: 7RM Loads For 140 Accubond?

I shoot a Rem 700 LSS with a break on it. 64-65g of IMR 4350 in Rem brass, 9 1/2 primer, bullet touching the lands shoots sub 1/2" groups. You will have to tweek the load for the lot of powder. Brand of primer and Brass is critical in this load. In this gun, if I go to another brand of brass or change primer, groups open way up, Velocity is 3250 fps in this gun.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 7RM Loads For 140 Accubond?
Thread Thread Starter Forum Replies Last Post
300 Wby 165 Accubond loads. LRSickle Reloading 0 12-09-2010 05:21 AM
7 Rem Mag loads using 160 accubond CA48 Reloading 8 10-20-2010 10:36 PM
338 WM, 225 Accubond loads buckbrush Reloading 4 09-09-2010 06:43 PM
7mm loads 160 gr accubond and 162 A max retiredcpo Reloading 9 01-06-2010 11:33 AM
Need 300 RUM & 180 AccuBond Loads JohnW Reloading 4 01-31-2008 06:10 PM

All times are GMT -5. The time now is 05:50 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC