Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

7MM WSM loads-help needed

 
LinkBack Thread Tools Display Modes
  #15  
Old 11-13-2012, 06:56 PM
Platinum Member
 
Join Date: Dec 2006
Location: New Mexico
Posts: 1,514
Re: 7MM WSM loads-help needed

Thanks NCBoy!

I too am using Win Brass with very good results.
Reply With Quote
  #16  
Old 11-13-2012, 07:32 PM
Bronze Member
 
Join Date: Jun 2010
Posts: 79
Re: 7MM WSM loads-help needed

I get the bullets from midway and the brass is Winchester.. The Hornady Concentricity gauge is truly awesome. This insures good runout and makes all the difference in the world. A must have tool. This past week we shot a 5 to 6 inch 3 shot group at 1140 yards.
Reply With Quote
  #17  
Old 11-13-2012, 09:27 PM
dwm dwm is offline
Gold Member
 
Join Date: Feb 2003
Location: Texas
Posts: 616
Re: 7MM WSM loads-help needed

That's awesome shooting NCBoy!

I ordered some 300WSM Norma brass and am planning to neck it down to 7WSM ...

Is anyone else doing this?

Also, I had some Retumbo laying around and wanted to fireform some 300WSM Federal brass to 7WSM.

I used 72.8 gr Retumbo, FED215M primers, 168Berger VLDs at a COL of 3.00 inches in Fed 300WSM cases.

Load looks promissing, but I was only fireforming the Federal brass.

Not sure how long the primer pockets will hold out in the Federal brass ...
__________________
doug
Reply With Quote
  #18  
Old 11-14-2012, 12:32 AM
Bronze Member
 
Join Date: Jun 2010
Posts: 79
Re: 7MM WSM loads-help needed

Thanks. I will tell you. The gun and caliber make it easy. People can say all they want. the 7MM calibers are shooters. It is a great bullet and easy to shoot when you have good components.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 7MM WSM loads-help needed
Thread Thread Starter Forum Replies Last Post
30-378 Wby Mag & 300 Win Mag Loads Needed drenner43 Reloading 13 10-05-2011 12:39 PM
338 rum loads needed splattermatic Reloading 2 05-18-2009 10:34 PM
338 rum loads needed splattermatic Rifles, Bullets, Barrels and Ballistics 1 05-16-2009 02:56 AM
22/250 loads needed grizzlyk Reloading 7 01-20-2008 12:57 PM
300 MK loads for the 338 RUM needed Jim the Plumber Rifles, Bullets, Barrels and Ballistics 1 03-04-2003 09:47 AM

Current Poll
I currently have hunting preference points in the following states

All times are GMT -5. The time now is 07:23 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC