close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

7mm RM chambering help

LinkBack Thread Tools Display Modes
  #8  
Unread 12-11-2006, 11:42 PM
Junior Member
 
Join Date: May 2005
Location: Fountain, CO
Posts: 21
Re: 7mm RM chambering help

Thanks for the ideas!

However, I think I did overlook the obvious...

I am mixing fired brass from two different rifles, and although I am full length resizing, could not the Savage "blow out" the case in the shoulder or head dimension that the die cannot resize, but is out of spec with the PSS?
Reply With Quote
  •   #9  
    Unread 12-12-2006, 08:41 AM
    Junior Member
     
    Join Date: Nov 2006
    Location: Alberta
    Posts: 9
    Re: 7mm RM chambering help

    I have an abolt that won't take full length resized brass from my RCBS dies even though those same shells fit other 7 mm mags no problem. I tryed to keep the brass separate between guns but eventually broke down and bought the RCBS small base die set and problem solved, the newly sized shells fit in every gun including mine. I've heard other people with similar problems around the 7 mm mag. I'm not sure about brass life with the small base set but it hasn't been an issue yet.
    Reply With Quote

      #10  
    Unread 12-12-2006, 10:10 PM
    Junior Member
     
    Join Date: May 2005
    Location: Fountain, CO
    Posts: 21
    Re: 7mm RM chambering help

    Forgive my ignorance but I haven't heard of a "small brass" set..... I'll give it a look!

    Again, this is a great forum. I am a long time lurker, but I have picked up quite a bit of info from the wiser ones here IE; Bailey, Meichele, Fiftydriver, etc....
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 7mm RM chambering help
    Thread Thread Starter Forum Replies Last Post
    chambering help fisherman98 Rifles, Bullets, Barrels & Ballistics 3 11-23-2010 08:11 AM
    Rounds Not Chambering? Elk Chaser Reloading 8 09-17-2010 09:06 PM
    B-78 chambering help elkaholic Gunsmithing 6 11-06-2009 09:22 PM
    Re chambering DONTSTROKEME Rifles, Bullets, Barrels & Ballistics 2 01-05-2007 11:06 AM
    Which chambering? philip h The Basics, Starting Out 1 03-20-2005 10:11 PM


    All times are GMT -5. The time now is 07:28 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC