close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

7mm Rem Mag & 140 Accubond

LinkBack Thread Tools Display Modes
  #1  
Unread 09-15-2012, 02:46 PM
Bronze Member
 
Join Date: Mar 2007
Posts: 36
7mm Rem Mag & 140 Accubond

Anyone have a pet load for the 7mm Remington Mag and the 140 gr Accubond. I also have some 140 gr TTSX I will be working on.
Reply With Quote
  •   #2  
    Unread 09-15-2012, 03:03 PM
    Platinum Member
     
    Join Date: Feb 2006
    Location: az
    Posts: 3,168
    Re: 7mm Rem Mag & 140 Accubond

    69 grain h4831. most guys use h-1000 though.
    Reply With Quote

      #3  
    Unread 09-15-2012, 03:32 PM
    Bronze Member
     
    Join Date: Mar 2007
    Posts: 36
    Re: 7mm Rem Mag & 140 Accubond

    So far I have worked up to 67gr of H4831sc with 3060 fps and no pressure signs. I do have some H1000 and Retumbo to try out. Thanks for your info.
    Reply With Quote
      #4  
    Unread 09-15-2012, 04:12 PM
    Silver Member
     
    Join Date: Jun 2008
    Location: Texas
    Posts: 416
    Re: 7mm Rem Mag & 140 Accubond

    Either 65.0grs of IMR-4350 or 69.5grs of Reloader-22 is what works for me with that bullet in my 7mags.It runs around 3200fps.
    Reply With Quote
      #5  
    Unread 09-15-2012, 07:39 PM
    DKA DKA is offline
    Bronze Member
     
    Join Date: Sep 2009
    Location: Lumberton, NC
    Posts: 91
    Re: 7mm Rem Mag & 140 Accubond

    Have not used Accubond 140 Gr but have used 160 Gr Accubond over H1000 and is very accurate load!!
    __________________
    Turn Adversity Into Advantage
    Reply With Quote
      #6  
    Unread 09-17-2012, 09:41 AM
    Bronze Member
     
    Join Date: Mar 2007
    Posts: 36
    Re: 7mm Rem Mag & 140 Accubond

    If anyone can share their load data using H1000 in the 7mm Rem Mag I would appreciate it.
    Thanks in advance. Bob
    Reply With Quote
      #7  
    Unread 09-17-2012, 04:02 PM
    Gold Member
     
    Join Date: Jan 2009
    Posts: 639
    Re: 7mm Rem Mag & 140 Accubond

    H-1000 is best when used with 160 grains and up bullets in the 7mag. I would stick with RL-22 or H4350. I have never met a 7 mag that wouldn't shoot 65gr of rl22 and a 150grain bullet under .75", so I would reccomend starting there and going up until you find a good group or reach pressure with the 140's.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 7mm Rem Mag & 140 Accubond
    Thread Thread Starter Forum Replies Last Post
    whats the difference between Winchester Accubond and Nosler Accubond? matt_3479 Rifles, Bullets, Barrels & Ballistics 3 06-29-2011 03:30 PM
    140 gr accubond new shooter Reloading 4 11-11-2010 10:35 PM
    165 gr. Accubond Jim Hundley Reloading 0 06-21-2006 09:32 PM
    162 A-max vs. 160 Accubond srhaggerty Rifles, Bullets, Barrels & Ballistics 13 02-04-2006 03:05 AM
    .257 Accubond johnnyk Rifles, Bullets, Barrels & Ballistics 10 07-11-2005 06:22 PM


    All times are GMT -5. The time now is 06:59 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC