close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

7mm Accubond Load

LinkBack Thread Tools Display Modes
  #1  
Unread 02-19-2006, 08:51 PM
Junior Member
 
Join Date: Dec 2005
Location: Pa.
Posts: 2
7mm Accubond Load

Anyone care to post up a load for 7mm Rem Mag. with 140gr. accubonds? Thanks.
Reply With Quote
  •   #2  
    Unread 02-19-2006, 08:57 PM
    Silver Member
     
    Join Date: Jan 2006
    Location: Arizona
    Posts: 320
    Re: 7mm Accubond Load

    the tighest group from my 7mag with out tuning the load was 65 grains of r22 with the 140 NAB. lit by F215M primers, in winchester brass. i have not tuned this load or played with the over all lenght but it shot a .956 out of a stock remington... heavy trigger pull and non-floated barrel.
    __________________
    77" coues buck, last day 571 yards. .257 Wby. 115 VLD
    Reply With Quote

      #3  
    Unread 02-20-2006, 02:51 AM
    Gold Member
     
    Join Date: Jul 2005
    Location: East TX
    Posts: 773
    Re: 7mm Accubond Load

    The best I've shot was 67 gr RL 19. I am not sure about the velocity, but out of a 24" barrel I think it was 3120-3140. Shot about 0.7MOA out to 200m when we tested it.
    __________________
    Stephen
    Reply With Quote
      #4  
    Unread 02-21-2006, 07:48 AM
    Silver Member
     
    Join Date: Jan 2005
    Posts: 186
    Re: 7mm Accubond Load

    I have two loads:
    Rem brass
    9 1/2
    65.0g of IMR 4350
    140g Accubond seated to touch the lands
    groups with the bullets touching at 3250

    Rem Brass
    9 1/2
    64.5g of H-4350
    140g Accubond
    Bullets seated to touch the lands
    3200 fps bullets touching at 100 yards

    Please don't change the brand of brass or primer in the above loads...groups go to crap if you do!

    Rifles and of course lot# of powders do change, so I'd back off a grain and work up to these loads.

    Good luck!
    Reply With Quote
      #5  
    Unread 03-06-2006, 08:30 AM
    Silver Member
     
    Join Date: Dec 2005
    Location: Central Florida
    Posts: 144
    Re: 7mm Accubond Load

    I'm still tweaking but as of now:

    Fed brass
    Fed 215M Primers
    63.8 Gr. IMR 4350
    140 Gr AB
    .005 off lands
    .5" @ 100 yds.

    I've tried this combo several trips to the range and keep repeating. Gonna play with seating depth some today.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 7mm Accubond Load
    Thread Thread Starter Forum Replies Last Post
    250 accubond load fo 338 Edge hegster Reloading 24 07-16-2009 04:11 PM
    30-378 200 grn Accubond Load SquirrelNuts Reloading 4 11-06-2008 09:25 PM
    7mm rem mag, 140 accubond load??? j70070 Rifles, Bullets, Barrels & Ballistics 0 01-30-2008 04:29 PM
    7 stw accubond load help dale thames Rifles, Bullets, Barrels & Ballistics 7 11-03-2004 04:53 PM


    All times are GMT -5. The time now is 05:41 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC