7mm-08...pet loads anyone

[huntem]

Greetings to all,

I recently purchased a 7mm-08 for my daughter's bear hunt. I was looking for a good starting point for a reload. Any recommendations are welcome for both heavy game or deer sized critters

Thanks in advance

[LOBO]

Remington brass
Federal primer
140 grain Sierra flat base soft point
46 grains of H4350

Chris

[Dan B]

I had great success on deer w/ the 154gr Hornady SST using a max load of H414.

[magicofmt]

39.5 gr IMR 4895 and 140 gr Accubond or Barnes Triple Shock, Fed 210 Primer, Norma brass, 2 inch groups at 200 yds. Gun needs trigger work or I could get better groups.

[wolf3006]

120 Grain Nosler Remington brass Wincherster primers 50 grains H-380 works good for me.

[youarenotcrazy]

I've been shooting 168 gr SMK (NOT for bear, just target) with 45 grs IMR 4350 MAX and with 39.5 grs Varget MAX (The IMR throws harder) with Rem brass and CCI primers. You won't want that bullet, but the data could be used for the 160 gr Partition. Just a thought if you wanted heavier bullets.

[elkfirst]

My daughter also uses a 7mm-08. 139 gr. Hornady Interlocks (#2820) 44.8 gr of IMR 4350, CCI 200 large rifle primers. Very accurate and works well on mulies, but don't know as if I'd recommend this load for a bear.