Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

505Gibbs case holder for the Hornady 50BMG press

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-10-2010, 08:38 PM
Junior Member
 
Join Date: Jun 2009
Location: Bullhead City, Arizona
Posts: 19
505Gibbs case holder for the Hornady 50BMG press

For those of you that own a 50BMG press, it comes with a nice beefy shell holder for the BMG, and an insert that takes the standard shell-holders. Well, I haven't had a lot of luck with the insert: it's not made for a case based on the 505 Gibbs. So, I spoke with Lonnie at Hornady's custom shop and they are going to make some BMG style holders for my rifle. I've requested two for myself. If you are also interested in something like this, please give Lonnie a call at Hornady at extension 208.

Mods: I felt that this was such a specialized item that it should be here. If the Equipment discussion section is mandated, go ahead and move the thread.
Reply With Quote

  #2  
Old 04-13-2010, 09:12 PM
Junior Member
 
Join Date: Jun 2009
Location: Bullhead City, Arizona
Posts: 19
Re: 505Gibbs case holder for the Hornady 50BMG press(Cheytac, Snipetac)

They're making them. I delivered two 375 Cheytac cases to Hornady. So far, three shell holders are being made for respondents.
Reply With Quote
  #3  
Old 04-14-2010, 06:19 AM
Official LRH Sponsor
 
Join Date: Jul 2006
Location: Harrisburg, PA
Posts: 2,281
Re: 505Gibbs case holder for the Hornady 50BMG press

I use an RCBS Ammo Master II press with an RCBS shell holder for the .505 Gibbs for all my .408 based stuff. The set up works flawlessly.
I don't know where you ran into trouble??
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 505Gibbs case holder for the Hornady 50BMG press
Thread Thread Starter Forum Replies Last Post
FS - Don Nielson Pumpkin Case Holder, Like New laver Reloading Equipment and Components 0 06-15-2011 10:24 AM
WTB magnum case head shell holder jeffro Reloading Equipment and Components 0 12-17-2010 03:38 PM
Reloading Equipment,ChargeMaster,Redding Case Lathe, RCBS Case Mate,Lee Press pa hog Reloading Equipment and Components 9 09-08-2010 08:06 AM
WTS-RCBS 7mm RUM die set, wilson case holder arthurj Guns For Sale 1 05-18-2005 11:35 AM
Review: LEE 50bmg Press Kit Ring Equipment Discussions 1 04-23-2005 07:10 PM


All times are GMT -5. The time now is 03:56 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC