.452 bullets in .45-70

[Lefty7mmstw]

Originally Posted by Scottielp503

I appreciate the help. I had another question. Could I do the opposite and resize a .45 pistol round like a .45lc or a .460s&w cartridge up to a .458 bullet and use that? If so it would be alot cheaper buying .45lc brasd than .45-70 brass.

Just whack 'em once each square on the top( be very careful you are square) with a claw hammer. It's gotta be a 24 oz. though, not a 16 oz.. The 16 won't get 'em to swell enough.

[J E Custom]

Originally Posted by Lefty7mmstw

Blinker fluid dude.....

Is that like "Red and Green running light oil" ?

J E CUSTOM

[Hairtrigger]

Actually
1 shoot 'em
2 dig 'em out of the back stop
3 melt 'em
4 cast 'em to the desired size..........

[Lefty7mmstw]

Originally Posted by Hairtrigger

Actually
1 shoot 'em
2 dig 'em out of the back stop
3 melt 'em
4 cast 'em to the desired size..........

only two of the above 4 steps are needed, pick two.......

[deathwobble]

If your asking about the resizing 45lc or 460 brass to fit in your 45/70 it wont work. the cases do not have interchangable dimesions. You Could get hurt trying it