Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


338 rum ackley improved

LinkBack Thread Tools Display Modes
Unread 11-13-2006, 10:06 PM
Gold Member
Join Date: Feb 2005
Posts: 628
Re: 338 rum ackley improved

I can tell you that the 338 ultra improved gets the same speed as the edge and does so with slightly less powder and a shorter barrel.

[/ QUOTE ]

is that with the accubonds? what about the 300 smk?

Reply With Quote

Unread 11-14-2006, 12:02 AM
Gold Member
Join Date: Sep 2005
Posts: 748
Re: 338 rum ackley improved

Hi to make a 338Edge out of a 300 ultra sizing die you take it to a machine shop and have them increase the neck diameter by 30 thou and that is it if you want a larger expander just replace it as you will require one for necking up the cases and for a seater just get a 338ultra die and it will work fine. If you have a Redding Type S Bushing Full length sizing die you can just open the neck bushing hole slightly then use the correct bushings for a 338.

Do you have Neil Jones details for dies as i am making a 338-300 improved with a 60 degree shoulder and need to organise a sizing die for it. I will be using a competition seater reamed out with my reamer.

Cheers Bill

Cheers Bill
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 338 rum ackley improved
Thread Thread Starter Forum Replies Last Post
7mm stw ackley improved?? dodgefreak8 Rifles, Bullets, Barrels & Ballistics 7 01-24-2013 11:02 PM
Ackley improved or Ackley changed north of 53 Rifles, Bullets, Barrels & Ballistics 10 10-19-2008 03:49 PM
.270 Win Ackley Improved? Death Ray 7 Rifles, Bullets, Barrels & Ballistics 5 03-13-2008 03:53 PM
30-06 Ackley Improved Wind Dancer Rifles, Bullets, Barrels & Ballistics 11 02-11-2005 10:02 PM
243 Ackley Improved Terry Brady Rifles, Bullets, Barrels & Ballistics 5 11-01-2003 02:05 AM

All times are GMT -5. The time now is 07:50 PM.

All content ©2010-2015 Long Range Hunting, LLC