Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


338 Edge load data needed.

LinkBack Thread Tools Display Modes
Unread 01-06-2013, 02:43 AM
Bronze Member
Join Date: Nov 2009
Posts: 34
Re: 338 Edge load data needed.

Shawn Carlock, i just had my edge returned to me. i loaded 300 grain bergers at4.020 an they wont feed so i cut back to 3.970 still wont feed... now i stuck a dummy bullet in a case that split so the bullet would slide easy with in the case and got over all lenght of 4.030..... i'm pretty sure the bullet was off the lands.. So i went back to the 250 smk and they feed fine at 3.795 but the bergers are much more tappered than the smk's what do you think my problem is???? do i have to resort to 3.785 oal?? its suppose to have a long throught though..
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: 338 Edge load data needed.
Thread Thread Starter Forum Replies Last Post
265 gr. Lapua/Edge data TSX needed slewfoot Rifles, Bullets, Barrels & Ballistics 17 08-26-2010 02:44 AM
22-250 AI 1x8 twist load data needed Veritas Long Range Hunting & Shooting 2 06-07-2008 07:13 PM
110 gr TSX- .270wsm load data needed. longgunshooter Reloading 1 09-01-2006 08:32 AM
Load Data Needed Jim Hundley Reloading 5 08-13-2006 08:33 AM
load data needed col48 Reloading 6 08-07-2006 12:45 AM

All times are GMT -5. The time now is 12:11 PM.

All content ©2010-2015 Long Range Hunting, LLC