Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


338 Edge Bushing Die

LinkBack Thread Tools Display Modes
Unread 11-29-2012, 04:34 PM
Join Date: Jul 2007
Location: Idaho
Posts: 366
338 Edge Bushing Die

Just recieved a set of Redding type S bushing dies for an Edge.
The rifle is new just got it from the gunsmith and ready to start to do the brass from 300 to 338
have the .308 to 338 tapper size button. As well as the dies but no bushing as yet to be ordered.
Question what size of a neck bushing should one start out with doing the brass for the first
time through?
What would be the recommed size to follow after one or two firings on the brass.
There are no 338 Edge owners in my area that I know of, so your help is needed.
Using Rem brass for now.
Thoughts on lube of the inside necks, have reloaded for several years and still learning
to date have only brushed inside the necks before loadind with a nylon bush.
Reply With Quote

Unread 11-30-2012, 03:39 PM
Silver Member
Join Date: Mar 2010
Location: nw Montana
Posts: 161
Re: 338 Edge Bushing Die

I think most guys are using a 363-366, mine was a 364 I believe. I used it from start to finish and had ten plus reloads on some. Had to swage some primer pockets but that all.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 338 Edge Bushing Die
Thread Thread Starter Forum Replies Last Post
284 Win bushing. barnesuser28 Reloading 13 01-18-2013 06:21 PM
Bushing Dies? blanko Reloading 25 03-10-2011 08:40 PM
Neck Bushing and Body Dies or FL Bushing Die??? MontanaRifleman Reloading 10 07-14-2009 07:29 AM
redding bushing dc3483 Reloading 5 03-28-2009 05:55 PM
Which Redding Bushing? Varmint Hunter Reloading 0 12-14-2008 04:38 PM

All times are GMT -5. The time now is 07:28 AM.

All content ©2010-2015 Long Range Hunting, LLC