Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


.338/300 Ultra Case Forming

LinkBack Thread Tools Display Modes
Unread 02-03-2005, 08:57 AM
Silver Member
Join Date: Jan 2005
Posts: 113
Re: .338/300 Ultra Case Forming

Do any of you anneal the necks? And how is the case life?
Reply With Quote
  •   #9  
    Unread 02-04-2005, 12:50 AM
    Silver Member
    Join Date: Nov 2004
    Location: GF Montana
    Posts: 467

    ricka's annealing page

    I anneal every other time. RUMS eat brass, esp with hot loads. Expect 3 reloadings
    300 RUM brass Thread
    Reply With Quote

    Unread 02-04-2005, 05:38 AM
    Silver Member
    Join Date: Jan 2005
    Location: BUSH,ALASKA
    Posts: 398
    Re: Annealing

    Thanks B1g_bOre for that link on annealing. I wish I would have had that for another thread on the same subject. I purchased the Hornaday kit serval years ok and It has been great. Again thanks!
    Reply With Quote
    Unread 02-09-2005, 10:56 AM
    Join Date: Jun 2007
    Location: North Idaho
    Posts: 1,882
    Re: Annealing

    I don't anneal the necks and can the brass after 6 loads. I'm hot to get my hands on some federal brass.
    Shawn Carlock
    Reply With Quote


    Thread Tools
    Display Modes

    Similar Threads for: .338/300 Ultra Case Forming
    Thread Thread Starter Forum Replies Last Post
    30 Gibbs case forming woods Reloading 14 03-22-2016 06:32 PM
    Case forming issues Crane Reloading 1 10-29-2009 12:31 AM
    Case forming question. VON GRUFF Reloading 0 05-15-2009 12:05 AM
    30-338 case forming question DougH9 Reloading 4 12-31-2005 05:43 PM
    Forming 6mm-06 case Problems? mindcrime The Basics, Starting Out 8 11-27-2005 10:40 AM

    All times are GMT -5. The time now is 07:40 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC