Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


.308 FL sizing die question.

LinkBack Thread Tools Display Modes
Unread 09-09-2013, 02:17 PM
Bronze Member
Join Date: Jun 2012
Location: Northern California
Posts: 49
Re: .308 FL sizing die question.

Thanks much for all the input.
I measured the expander ball. It's good. Found the problem. The center shaft is bent. Guess this is causing the expander to come through at an angle.
I suppose this is what I deserve for loaning it out. My neighbor decided to start learning how to load. He gathered up a bunch of brass from the range. It was all berdan primed.

Long story short. I'm gonna purchase a bushing die from redding.
Reply With Quote



Thread Tools
Display Modes

All times are GMT -5. The time now is 04:36 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC