Re: 300WM 208GR A-MAX load recommendations.
careful hot load but no signs of pressure in my gun.
imr-4350 69.5 grains
208 grn amax set .020 off lands (no it won't fit the mag)
24" mcgowen 1/10 bullbarrel
3 shots one hole measuring .37"@100 yrds
i loaded up to 70 grains but primers slightly cratered (very slightly probably ok but errored on the side of caution back to 69.5)
set .020 off lands
2 shots same hole and one shot with center touching the other 2s outside diameter @ 100 yrds
both very accurate
Last edited by load; 01-18-2010 at 10:09 PM..