Originally Posted by briannelson89
Planning on shooting 210 bergers any one have a good starting load
I just went through this process and ended up with two very accurate loads using my 24" Rem Milspec. Using Berger 210 Hunting VLD's loaded .010" off the lands, Norma brass, Fed 215 primers, neck sized to .335" with Redding bushing dye.
75.5 gr H1000, 2750 FPS
79 gr Retumbo 2855 FPS
Both loads give sub .5MOA, ES under 12FPS. No pressure signs. I'd start a couple of grains lower and work up in .5 gr increments.