close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

300 Win mag load advice

LinkBack Thread Tools Display Modes
  #8  
Unread 10-20-2008, 07:59 PM
Silver Member
 
Join Date: Aug 2006
Location: corpus christi tx
Posts: 424
Re: 300 Win mag load advice

i shoot 79 gn h4831 180 ab fed gm brass and fed gm 215 primers good for 3106 fps cant remember sd off top of my head but it was in the low teens
__________________
stxhunter
Reply With Quote
  •   #9  
    Unread 10-22-2008, 06:14 PM
    Junior Member
     
    Join Date: Jan 2008
    Posts: 24
    Re: 300 Win mag load advice

    Quote:
    Originally Posted by longrange.270 View Post
    I've been messing around with Berger 210gr VLDs, 200gr SMK's, and Hornadys 208gr. A-Max.
    I did some work with the Sierra 240 VLDs - the results were good, but they were hard on the brass. I am now using the Hornady 208gr A-Maxes and couldn't be happier. They are a tight shooting bullet and good for target or game. I haven't tried them with Reloader 22 yet, but the results with IMR 7828SSC are pretty good. They are chronographed around 2850 fps the couple times I've been able to get them checked.
    Reply With Quote

      #10  
    Unread 10-24-2008, 09:33 AM
    Silver Member
     
    Join Date: May 2005
    Location: Montana
    Posts: 436
    Re: 300 Win mag load advice

    200 gr Accubonds and H-1000 is the recipe my 300 WM likes. 2860 ft/sec with 75 gr. Any faster, groups start to open up. Norma brass and Fed 215
    __________________
    Magic
    Reply With Quote
      #11  
    Unread 10-24-2008, 09:38 AM
    Platinum Member
     
    Join Date: Feb 2005
    Location: USA
    Posts: 2,598
    Re: 300 Win mag load advice

    I also am a fan of H-1000
    __________________
    range it,check the wind, dial in correction, aim and only one shot
    Reply With Quote
      #12  
    Unread 10-24-2008, 11:04 AM
    Bronze Member
     
    Join Date: Dec 2006
    Location: Alberta,Canada
    Posts: 57
    Re: 300 Win mag load advice

    H1000 and a 180 SMK,easy on brass and fun to shoot its doing 3040 average
    for sum reason this load works best in cooler weather


    im still doing sum work with 200 grain Accubonds pics to come later
    here is the 180 accubond

    and ballistic tip
    Reply With Quote
      #13  
    Unread 10-24-2008, 11:12 AM
    Platinum Member
     
    Join Date: Feb 2005
    Location: USA
    Posts: 2,598
    Re: 300 Win mag load advice

    180 grain TSX, 81 grains of H-1000 in Winchester cases and a Federal 215 primer


    __________________
    range it,check the wind, dial in correction, aim and only one shot
    Reply With Quote
      #14  
    Unread 10-29-2008, 07:15 AM
    Silver Member
     
    Join Date: Dec 2004
    Posts: 366
    Re: 300 Win mag load advice

    Mine will shoot 180 Noslers (Parts. or Accu) or 180 SGK's pretty tight behind 75.5 gr RL-22 and Fed 215M primers. It will shoot one hole groups with 200 Gr ( same afore mentioned boolits) with 70.5 gr RL-22. This load has shot sub 1" groups @ 300 for me, when I do what I am supposed to.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 300 Win mag load advice
    Thread Thread Starter Forum Replies Last Post
    need some advice on a hot load banthony Reloading 7 05-28-2009 10:23 AM
    **sd and es load advice** JEREMY logan Reloading 9 05-16-2009 07:12 AM
    Load Advice Willys46 Reloading 7 06-19-2008 09:16 AM
    hot load advice eddybo Reloading 11 06-13-2008 06:44 AM
    Load advice for 168 Berger? Casey Napier Reloading 7 06-12-2007 06:26 AM


    All times are GMT -5. The time now is 09:04 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC