Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

300 Win Mag Brass

 
LinkBack Thread Tools Display Modes
  #8  
Old 08-15-2013, 10:25 PM
Silver Member
 
Join Date: Oct 2012
Location: Windsor, VA (but heading for the Rockies)
Posts: 315
Re: 300 Win Mag Brass

Thanks for the info guys and the pms. You guys rock!!

DocB
__________________
http://www.heaven-scent-rescue.org

"History does not long trust the care of freedom to the weak or timid" Dwight David Eisenhower
Sic Semper Tyrannis...Veritas et Aequitas

Reply With Quote
  #9  
Old 08-16-2013, 10:59 AM
Platinum Member
 
Join Date: Jun 2010
Location: greenwood, IN
Posts: 3,628
Re: 300 Win Mag Brass

Quote:
Originally Posted by DocB View Post
Ok, so I'm just about at wit's end trying to find 300 Win Mag brass.

I've looked everywhere online that I know where to look. I can't even find the really expensive Norma or cheap Privi brass... or anything in between.

My option right now is to buy relatively inexpensive (for today's market) 150gr Hornady ammo and shoot it for the brass. The downside to this option is I'm gonna use up my barrel 'makin' brass' to reload. This just doesn't sound like a 'win-win' situation to me at all.

Most of you know how I feel about this contrived ammo and components shortage, but that's another topic.

So searching for alternatives... is there any other caliber brass that I can either trim down or reform to work for 300 WM that will be relaible and accurate? Just a thought.

I'm not looking for anyone's brass ... you are going to need it so thanks anyway. Just ideas on making or locating good 300 Win Mag brass.

Thank Fellas...

DocB
have some once fired brass out in the garage. You can have it! Think there's at least twenty pieces and maybe over thirty. Think most of it is Federal.
gary

P.S. PM me or email me (better)
Reply With Quote
  #10  
Old 08-16-2013, 11:15 AM
Edd Edd is online now
Platinum Member
 
Join Date: Jan 2011
Location: Tulsa
Posts: 1,159
Re: 300 Win Mag Brass

Quote:
Originally Posted by MTBULLET View Post
375 H&H OR 338 WIN MAG would work, but prob'ly cheaper to just buy good factory ammo and re use brass, 100 or 200 rds is not going to harm bbl.
You're going to need a good case stretcher if you use 338 Win Mag brass.
Reply With Quote
  #11  
Old 08-16-2013, 11:25 AM
Silver Member
 
Join Date: Oct 2012
Location: Windsor, VA (but heading for the Rockies)
Posts: 315
Re: 300 Win Mag Brass

Quote:
Originally Posted by Trickymissfit View Post
have some once fired brass out in the garage. You can have it! Think there's at least twenty pieces and maybe over thirty. Think most of it is Federal.
gary

P.S. PM me or email me (better)
Thanks Gary, Email sent!

Let me know if you get it!

Thanks!
__________________
http://www.heaven-scent-rescue.org

"History does not long trust the care of freedom to the weak or timid" Dwight David Eisenhower
Sic Semper Tyrannis...Veritas et Aequitas

Reply With Quote
  #12  
Old 08-16-2013, 01:13 PM
Silver Member
 
Join Date: Oct 2012
Location: Windsor, VA (but heading for the Rockies)
Posts: 315
Re: 300 Win Mag Brass

Quote:
Originally Posted by rharfo View Post
numerous listing on gunbroker for 300 win mag brass and the prices don't look too bad
Just registered with GunBroker. A quick look (it's going on midnight and my eyes are giving up the ghost!) shows there's quite a bit.

Thanks for the heads up!

DocB
__________________
http://www.heaven-scent-rescue.org

"History does not long trust the care of freedom to the weak or timid" Dwight David Eisenhower
Sic Semper Tyrannis...Veritas et Aequitas

Reply With Quote
  #13  
Old 08-16-2013, 02:30 PM
Gold Member
 
Join Date: Jul 2007
Posts: 951
Re: 300 Win Mag Brass

Quote:
Originally Posted by Edd View Post
You're going to need a good case stretcher if you use 338 Win Mag brass.
ya, not perfect way to do it, ends up with about a 1/2 cal. neck, but it is do able
Reply With Quote
  #14  
Old 08-16-2013, 07:25 PM
Edd Edd is online now
Platinum Member
 
Join Date: Jan 2011
Location: Tulsa
Posts: 1,159
Re: 300 Win Mag Brass

Quote:
Originally Posted by MTBULLET View Post
ya, not perfect way to do it, ends up with about a 1/2 cal. neck, but it is do able
I think my definition of "do able" is different than yours.

Midway is showing Remington brass in stock.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 09:45 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC