close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

300 Weatherby info

LinkBack Thread Tools Display Modes
  #8  
Unread 06-07-2008, 06:38 AM
Silver Member
 
Join Date: Nov 2005
Location: south central pa
Posts: 215
208 amax

may want to try 208 hornady amax.bc is .645 ish compared to the .588 of the accubond.i shoot the amax.
Reply With Quote
  •   #9  
    Unread 06-07-2008, 08:39 AM
    Platinum Member
     
    Join Date: Jul 2004
    Location: Texas
    Posts: 7,001
    Most belted cartriges like little or no headspace .So when sizeing the brass
    size only enough to chamber the round.

    This will normally improve accurace.

    If you have a neck sizer use it for a couple of loads then just touch the case
    with the full length sizer .

    Once you fire a belted case there is no headspace unless you size the
    entire case.

    If the rifle has less than .001 headspace (using a headspace gauge) then
    you can full length size every time.

    J E CUSTOM
    __________________
    "PRESS ON"
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 300 Weatherby info
    Thread Thread Starter Forum Replies Last Post
    FS: Vintage 1960's made in germany Weatherby Mark V in Weatherby 300 mag. stover954rr Guns For Sale 3 12-18-2013 09:53 AM
    300 Weatherby info davewilson Reloading 6 01-03-2011 02:48 PM
    .240 Weatherby Info ovastafford Rifles, Bullets, Barrels & Ballistics 6 04-09-2010 05:55 PM
    Load info for 30 378 weatherby 700mud Reloading 2 12-25-2009 10:05 PM
    Freebore excess in Weatherby rifles chambered in non-Weatherby rounds? Yorkplates Rifles, Bullets, Barrels & Ballistics 19 09-28-2009 08:41 PM


    All times are GMT -5. The time now is 11:38 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC