Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

.300 RUM loads for factory sendero?

 
LinkBack Thread Tools Display Modes
  #8  
Old 08-31-2008, 06:43 PM
Bronze Member
 
Join Date: Aug 2008
Location: Helena, Mt
Posts: 61
Re: .300 RUM loads for factory sendero?

We shoot 95gr of Retumbo under a 200gr Accubond in Rem brass lite by a Fed 215MM primer. We get right at 3100fps and all groups between .300 and .750 in three different Rem 700's. One is a Sendero, it shoots the best of course..
Reply With Quote
  #9  
Old 08-31-2008, 11:23 PM
Bronze Member
 
Join Date: Mar 2008
Posts: 53
Re: .300 RUM loads for factory sendero?

Thanks for all the replies guys.

WSlayman, What was your seating depth on this load?

Quote:
Originally Posted by WSlayman View Post
We shoot 95gr of Retumbo under a 200gr Accubond in Rem brass lite by a Fed 215MM primer. We get right at 3100fps and all groups between .300 and .750 in three different Rem 700's. One is a Sendero, it shoots the best of course..
Reply With Quote
  #10  
Old 09-01-2008, 12:29 PM
Bronze Member
 
Join Date: Aug 2008
Location: Helena, Mt
Posts: 61
Re: .300 RUM loads for factory sendero?

dmproske, 3.590" Enjoy your 300
Reply With Quote
  #11  
Old 09-01-2008, 01:02 PM
Platinum Member
 
Join Date: Jun 2005
Location: Yakima, Washington
Posts: 3,833
Re: .300 RUM loads for factory sendero?

Here's some links posted on LRH that may help out a little.

Need a 300RUM Coyote load.

http://www.longrangehunting.com/foru...bergers-28399/

Imr7828 300 Rum

need a 300 rum 200gr gameking load?

Need 300 RUM & 180 AccuBond Loads

.300 RUM 210VLD RL 25 Recipes?

300 RUM handloads

Need A 300 Rum Load Quick!

300 RUM and 200 gr Accubonds

.300 RUM loads for factory sendero?
__________________
ss7mm
Reply With Quote
  #12  
Old 09-01-2008, 10:40 PM
Junior Member
 
Join Date: Mar 2005
Posts: 20
Re: .300 RUM loads for factory sendero?

Quote:
Originally Posted by archdlx View Post
Thank you Wallowa...I thought it was a shot at Remmies, and fireball thought he should use JB Weld!! lol

dmproske...I have not tried these loads so start lower!
The fellow I got my 300 from was using 100 gr Retumo over 180 gr AB's.
He also had good luck with 80 of IMR 4350 under the same boolit. Again, I HAVE NOT used these loads...
I am getting some of those powders, as well as RL-25, to try with Wildcat 210's.
Have also put in an order of 180 and 190 gr Hairfield type boolits from Richard, for hunting our CWD'd whitetails and mulies.
Lot's of tags this year-extended season and Sunday hunting as well!!

Good Luck,
LeRoy
No not JB weld LOL!JB bore paste I use it in new guns it speeds up the brake in and polishes the bore and it doesn't copper up as bad and cleans easier.It also cleans copper out of the bore well.And I like remingtons,I use JB on every factory gun.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: .300 RUM loads for factory sendero?
Thread Thread Starter Forum Replies Last Post
Factory Loads alloutsmith3 Rifles, Bullets, Barrels and Ballistics 1 02-10-2011 02:52 PM
Factory loads rtabor The Basics, Starting Out 11 08-07-2010 03:42 PM
300 rum factory loads slwatson Rifles, Bullets, Barrels and Ballistics 5 10-18-2005 03:43 PM
300 rum factory smk loads dakotagoon Long Range Hunting & Shooting 1 09-20-2004 07:20 PM
Best Factory .308 loads rice Rifles, Bullets, Barrels and Ballistics 6 08-13-2004 07:10 AM


All times are GMT -5. The time now is 04:34 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC