Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

.300 RUM loads for factory sendero?

 
LinkBack Thread Tools Display Modes
  #1  
Old 08-27-2008, 02:32 PM
Bronze Member
 
Join Date: Mar 2008
Posts: 53
.300 RUM loads for factory sendero?

I have a .300 RUM Sendero SF-II. Factory barrel with a break & 3lb trigger. Am looking for your favorite loads with factory Remington barrels.

I will probably be using 180 and 200 grain accubonds as they seem to be favorites here. Also please advise your case trim length and cartridge overall length.

I searched for some loads on here, some of the links don't work any more. Found some loads listed but need some suggestions on seating depth.
Reply With Quote
  #2  
Old 08-28-2008, 04:00 PM
Bronze Member
 
Join Date: Jul 2006
Posts: 50
Re: .300 RUM loads for factory sendero?

My 300rum sendero likes the 200AB over 92.5 gr RL25. OAL is all my mag. box will allow. This round will shoot about 1 1/4'' groups at 300yrds on a good day.
And before ya ask about 3'' at 300 on a BAD DAY. This round sighted in at 300 is about 7'' low at 400 and 18-20'' low at 500.
Reply With Quote
  #3  
Old 08-30-2008, 08:39 AM
Junior Member
 
Join Date: Mar 2005
Posts: 20
Re: .300 RUM loads for factory sendero?

I'd use some JB in the bore before you shoot it.Seems like all the remingtons I shoot like it I get a used bore brush put some jb on a patch and give it about 50 strokes and then put another patch on the brush and give it another 50 and one more with 50.After that the groups tighten and the gun cleans easy.Good Luck Ron
Reply With Quote
  #4  
Old 08-30-2008, 10:36 PM
Bronze Member
 
Join Date: Apr 2008
Location: Bruce Mines, On,
Posts: 33
Re: .300 RUM loads for factory sendero?

Fireball: what is JB ??
Reply With Quote
  #5  
Old 08-31-2008, 12:38 AM
Bronze Member
 
Join Date: Nov 2007
Location: East Central Alberta
Posts: 91
Re: .300 RUM loads for factory sendero?

^^^ x2^^^

archdlx
Reply With Quote
  #6  
Old 08-31-2008, 12:50 AM
Bronze Member
 
Join Date: Mar 2003
Location: Oregon
Posts: 35
Re: .300 RUM loads for factory sendero?

JB Bore paste. It's a super fine lapping compound, and it works great!
Reply With Quote
  #7  
Old 08-31-2008, 01:21 AM
Bronze Member
 
Join Date: Nov 2007
Location: East Central Alberta
Posts: 91
Re: .300 RUM loads for factory sendero?

Thank you Wallowa...I thought it was a shot at Remmies, and fireball thought he should use JB Weld!! lol

dmproske...I have not tried these loads so start lower!
The fellow I got my 300 from was using 100 gr Retumo over 180 gr AB's.
He also had good luck with 80 of IMR 4350 under the same boolit. Again, I HAVE NOT used these loads...
I am getting some of those powders, as well as RL-25, to try with Wildcat 210's.
Have also put in an order of 180 and 190 gr Hairfield type boolits from Richard, for hunting our CWD'd whitetails and mulies.
Lot's of tags this year-extended season and Sunday hunting as well!!

Good Luck,
LeRoy
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: .300 RUM loads for factory sendero?
Thread Thread Starter Forum Replies Last Post
Factory Loads alloutsmith3 Rifles, Bullets, Barrels & Ballistics 1 02-10-2011 02:52 PM
Factory loads rtabor The Basics, Starting Out 11 08-07-2010 03:42 PM
300 rum factory loads slwatson Rifles, Bullets, Barrels & Ballistics 5 10-18-2005 03:43 PM
300 rum factory smk loads dakotagoon Long Range Hunting & Shooting 1 09-20-2004 07:20 PM
Best Factory .308 loads rice Rifles, Bullets, Barrels & Ballistics 6 08-13-2004 07:10 AM


All times are GMT -5. The time now is 03:43 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC