close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

300 RUM Brass

LinkBack Thread Tools Display Modes
  #1  
Unread 06-19-2007, 09:46 PM
Junior Member
 
Join Date: Feb 2007
Posts: 15
300 RUM Brass

I did a search but didn't come up with anything. I just ordered a 300 RUM and need to get set up. Who else besides Remington and Nosler is currently making brass in this caliber? I have a 338 RUM and Remington is the only choice available. Although it looked like hell when it was new it seems to be of good quality and is holding up well. So if it'a only between Remington and Nosler is there really any difference. I've never used Nosler and all I know about it is it's more expensive.

Thanks,

Double AA
Reply With Quote
  •   #2  
    Unread 06-19-2007, 10:56 PM
    Platinum Member
     
    Join Date: Jun 2003
    Location: Hermiston, Oregon
    Posts: 2,026
    Re: 300 RUM Brass

    Haven't used any nosler brass myself, but I can tell you its much better then rem brass from all the reading i've done..

    Not that rem brass was all that bad, nosler just weight sorts it, chamfer and deburs it, ready to load!! Its also quite a bit harder then rem brass from what I've read, so should withstand higher pressures and last a little longer..

    I used Rem brass in my 300 RUM and got 8 firings per case out of them. I ran them to max or right below max.
    Reply With Quote

      #3  
    Unread 06-20-2007, 10:04 PM
    Platinum Member
     
    Join Date: Jul 2004
    Location: Texas
    Posts: 6,927
    Re: 300 RUM Brass

    Double AA

    Nosler brass is nice but it,s 25% more expensive.

    And as remington man said its weight sorted,deburred
    & chamfered.

    So if you take the remington brass and do the same you
    wont lose 25% of the brass by weight (the last batch of
    remingtion brass I weight sorted out of 200 rds i had
    11 rounds that were out of spec and I used them for test
    loads and barrel breakin)less than 6% loss not 25%.

    Dont get me wrong Nosler has a good product and a smart
    selling point but if you buy the same 300 RUM brass a year
    from now it may not weigh the same as the first batch.

    Just my opinion [img]/ubbthreads/images/graemlins/smile.gif[/img]
    J E CUSTOM
    __________________
    "PRESS ON"
    Reply With Quote
      #4  
    Unread 06-20-2007, 11:02 PM
    Platinum Member
     
    Join Date: Sep 2004
    Location: on the rifle range in Utah
    Posts: 2,704
    Re: 300 RUM Brass

    I don't know if I just had Remington brass figured out better or what but it seems to produce more accurate groups. Nosler is just as soft if not softer than Remington in 300 ultra. It also weighs more.

    It is beautifully produced brass though. You don't really need to neck turn or prep it at all-other than uniform the pockets. It is good stuff but I have had better luck getting Remington to shoot so far. Hopefully that will change..........
    __________________
    Find it
    Range it
    Click it
    Pull it
    Dump it

    If it's not far, it's boring.
    Reply With Quote
      #5  
    Unread 06-21-2007, 07:22 AM
    Platinum Member
     
    Join Date: Jan 2004
    Location: Blackfoot, Idaho
    Posts: 8,841
    Re: 300 RUM Brass

    Looks like I'm going to find out some things about the Nosler brass in 300 RUM reformed to the 270 AM. If its softer and heavier than the Remington stuff I'm most probably in trouble.
    [img]/ubbthreads/images/graemlins/frown.gif[/img]
    __________________
    I may be the slowest guy on the mountain . . . . but . . . . I'm on the mountain!
    Reply With Quote
      #6  
    Unread 06-21-2007, 04:09 PM
    Silver Member
     
    Join Date: Oct 2004
    Posts: 175
    Re: 300 RUM Brass

    Dont buy Nosler 300 to use in 270AM i did had alot of issues
    went out got remingon bass all sized fine.
    Reply With Quote
      #7  
    Unread 06-21-2007, 06:00 PM
    Platinum Member
     
    Join Date: Jan 2004
    Location: Blackfoot, Idaho
    Posts: 8,841
    Re: 300 RUM Brass

    Now! he tells me. [img]/ubbthreads/images/graemlins/frown.gif[/img]

    Already got'em. Opened the box. And even fondled 'em a bit. [img]/ubbthreads/images/graemlins/blush.gif[/img]
    __________________
    I may be the slowest guy on the mountain . . . . but . . . . I'm on the mountain!
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 300 RUM Brass
    Thread Thread Starter Forum Replies Last Post
    338 Lapua Brass compared to 300 Remington Ultra Brass DANTEC Rifles, Bullets, Barrels & Ballistics 6 02-29-2012 11:43 PM
    Group differences in Weatherby Brass versus new Norma Brass TX mountain hunter Long Range Hunting & Shooting 5 12-29-2010 10:17 PM
    25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
    338 Edge, Brass life test. Rem 300RUM brass AJ Peacock Reloading 15 12-30-2009 12:26 PM
    Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM


    All times are GMT -5. The time now is 12:43 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC