30-06 load data

[aponcelet1]

Anyone have load data for 180gr Hdy SST for 30-06. powders i have on hand H4350, Imr 4350, Imr 4831 and Imr 4046 grateful for any help.

[Trnelson]

I'd check IMR - Legendary Powders first and get a feel for a safe place to start. My new Hornady book isn't near me now. Someone will likely be along and share. Be safe. YMMV

[Hardbawl]

Our standard load for .30/06 is: 57 gr H4350 in a Winchester FL sized case, sparked by a Rem 9 1/2 primer. Hornady 180 SSTs or the better Interbond cork the case. They both shoot the same as far as accuracy and drop.

We are using Winchester Model 70s with the Boss thing. My rifle shoots in the 5s and my sons in the 4s. This load shoots good summer or winter. Now these are hunting rifles so they get shot more in cold weather. Since we adjust the rifle to the load we can swap ammo and still get good results.

Be smart and start lower and work up. We consider this a hot load.

[Centxshooter]

Using the 180's with 56gr of IMR4350 with CCI200 primers. Shoots .5-.75 in 700 ADL if I do my part.

[Steel Rain]

Just worked a load up for my dad's Remington 700 ADL that when he purchased had been through a fire and covered in rust. Bullet was 165gr Hornady Interlock pushed by 57.5 grains of H4350 and CCI 200 Primer in PMC once fired factory brass I cleaned up. Shot 5 shot group within .52" at 100 yds. Not sure of muzzle velocity as I shot at indoor range which doesn't allow for that kind of set up.

[roninflag]

what rifle??

[aponcelet1]

Remington old woodsmaster semi. It likes the 180s i use it in heavy brush stands.
Thanks for all the help