close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

30.06

LinkBack Thread Tools Display Modes
  #1  
Unread 02-29-2008, 12:23 PM
Junior Member
 
Join Date: Feb 2008
Posts: 3
30.06

Hello everyone im new to this site, I have a winchester model 70 ranger in 30.06 and have just started reloading, what is everyone loading for both hunting white tail and target shooting for accur?

thanks
Reply With Quote
  •   #2  
    Unread 02-29-2008, 07:38 PM
    Platinum Member
     
    Join Date: Jan 2008
    Posts: 1,471
    52 grs. IMR 4064, CCI BR2 primer, Rem Case, 150 gr Nosler Ballistic Tip will get the deer killing part of the question done and go a long way toward the accuracy department also in many 30-06's.
    Reply With Quote

      #3  
    Unread 02-29-2008, 09:44 PM
    Platinum Member
     
    Join Date: Feb 2005
    Location: USA
    Posts: 2,598
    Work up to as mush as 59 grains of H-4350 with 165 or 168 grain bullets or 57.5 grains with 180's. I use Federal 210 Match primers in Win. Cases and those are very accurate in my rifle. I load those charges with both the Nosler AccuBond or Barnes TSX bullets...
    __________________
    range it,check the wind, dial in correction, aim and only one shot
    Reply With Quote
      #4  
    Unread 03-01-2008, 03:13 PM
    Official LRH Sponsor
     
    Join Date: Mar 2007
    Location: Montana
    Posts: 2,672
    57grns IMR-4831, 180grn ballistic tip. Gets good velocity and seems to shoot well out of all the 30-06 I've tried it in. Should also work well w/ the Accubond.
    __________________
    Hammer Bullets
    Advanced Technology
    Simply Better


    To hunt... or not to hunt...? What a stupid question.
    Reply With Quote
      #5  
    Unread 03-21-2008, 04:56 PM
    Bronze Member
     
    Join Date: Dec 2007
    Location: Georgia
    Posts: 50
    168gr sierra match king(target) 165sierra game king (hunting) over 57gr IMR4350 with a CCI BR2 primer(benchrest) and winchester brass.Loaded with lee collet dies this gives me 1/2 moa from an out of the box savage116 sporter with a 22" barrel. Its near max so reduce a couple of grains and work up.
    good luck Skip
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 06:37 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC